How much ram was used for you two guys?

I just remounted my sink and i lapped a little more now and used thermal right Chillfactor, I have the thermalright ultra 120 extreme.

Now i have Q6600 @ 3.6ghz

Now after remounting sink with a PENNY under the clamp that holds the block on ..... I have solved the 10C difference in core 0-1 being 10C higher then 2-3 under full load and Idle it is now only 2-3 Difference instead of 5-6C difference.

Anyhoo .... full load running Linpack with 1.5gb of ram used as i chose half memory free which was 3006 something like that.

Anyhoo Temps stayed even now max it hit was 84-84-81-81 .... well before i did all this tonight of remounying and such Temps maxed 86-84-74-74 = 10C difference between the cores.

Now get this ... its not any worse and not any better for Linpack test results .... LOL ..... but at least more even temps now.

I will have to see how it is in 1-3 days although tey say no break in period for Chillfactor .. there is always a settle in period for all TIM being used.

I also noticed that more ram being used = more HEAT = Higher Temps.