Real Temp - New temp program for Intel Core processors

[unclewebb]

@uncle: using the 2.70...seems that if i minimize the window, it stays in the taskbar, unlike previous betas, only the tray temps remain

Holy crap, my heart almost fell out of my chest! I'm glad you figured it out. I did a few last minute changes to how RT minimizes and I had this fear that maybe I screwed something up.

Xello: It must have been the driver!

Here's what I see:

17:28:01 32 32 36 25
17:28:02 46 46 45 39
17:28:03 50 49 46 41

The difference in temps between :01 and :02 is
14 14 9 14

The reason core2 only moved 9 degrees while the other ones all moved 14 is because it is stuck at 36.

Comparing :03 to :01 you get
18 17 10 16

Once again core2 really sticks out as being stuck when this test initially started.

This is good to know. Before I can try and come up with some calibration factors you need to drop your MHz down to about 6x333 or 6x266 and drop your core voltage as close to 1.10 volts as possible. Turn up your fans, open your case and try to force those temp numbers lower. You're trying to prove if any other sensors are getting stuck. Even 1C less will prove that core0 and core1 are not stuck at 32C.