Just a couple of minor updates.



I squeezed the CSV option into the Settings window so you can save the log to an Excel friendly .csv file.

I also changed how often the log file gets written to your hard drive. It used to be once per hour but it has been increased to once every 5 minutes by default.

If you like more control over this then you can go into the RealTemp.INI file and use:

HDWrite=

to set the interval to whatever you like. If you have an unstable system and you don't want any temperature data getting lost then use an interval of 1 so all temperature data is written to the hard drive as it becomes available. You can still control how often temp data is collected by setting the Log Interval in the Settings window.

RealTemp used to write data out once per hour. If you would like to continue using that then set HDWrite=3600. (3600 seconds = 1 hour)

Maximum is 86400 seconds which is the equivalent of 24 hours or 1 day. That will create a large log file but will prevent RealTemp from accessing the hard drive during a big super test you're running.

http://www.fileden.com/files/2008/3/...alTempBeta.zip

Download, unzip and copy the new RealTemp.exe into your present RealTemp folder if you'd like to take this version for a spin.

If RealTemp goes black, it's hopefully not my fault.