Do you guys notice if the memory gets really hot on your cards during Furmark?
Do you guys notice if the memory gets really hot on your cards during Furmark?
i7-2600k @ 4.8Ghz 1.38v L044A892
ASUS P8P67 LGA
16GB G.Skill Rip Jaws DDR3 1600Mhz Memory
1/2" ID Masterkleer, Swiftech MCP-655, Thermochill PA120.3 Rad, XSPC Rasa, MCW-60
Cooler Master UCP 1100 Watt PSU
GTX 680 1300/7000
Lian Li PC V-2000
I've noticed in games that the VRM goes up to around 50C. While GPU only goes up a few C. I honestly wouldn't worry about Furmark as it really doesn't represent the kind of stress your video card will experience in most games.
[SIGPIC][/SIGPIC]
I agree, but...
It's like asking someone to use a processor crashing after 10mn of prime95 because quiet no program will stress it that much
For me, it's hard to get a product that won't be able to work when it is asked to do at 100%
But surely, for many people outside XS and overclocking forums, it won't be a problem since they never heard of Für. That's maybe 90% of PC users![]()
Q6600 G0 L740B126 Lapped, 2x1Gb Kingston HyperX DDR2-1200
Gigabyte 8800 GTS 512Mb OC 756-1890-1000
TT Toughpower 750 W (W0116) new 8xPCI-E Rev.
Western Digital Caviar SE16 WD6400 AAKS rocks
WC: Swiftech H2O-Apex Ultra 220 GT + PA120.3 5v
OCZ XTC RAM Cooler, HR-05 IFX + 80mm FAN (NB), 2x HR-09U type 2 (mosfets), Modded Zalman ZM NB-47J (SB), Arctic-Cooling MX-2
Vista 32 bits
------------
- ASUS P5K Premium bios 0612: (3.84GHz 8x480) @1.432v
------------
- P5B Deluxe: 3.60GHz (9x400) @1.33v *** Old Setup (P5B deluxe)
OCCT 2.x Final Download
My VRM idles aboout 50c with huge heatsinks and airflow. RTHDRIBL load it to about 80c. Games its about 70c. Then again we dont even know how accurate the Everest sensor reading is.
Im with Johnny about stability - if its capable of crashing then thats more than enough for me to do something about it and address it. I can't just say oh well it's just Furmark.
i7-2600k @ 4.8Ghz 1.38v L044A892
ASUS P8P67 LGA
16GB G.Skill Rip Jaws DDR3 1600Mhz Memory
1/2" ID Masterkleer, Swiftech MCP-655, Thermochill PA120.3 Rad, XSPC Rasa, MCW-60
Cooler Master UCP 1100 Watt PSU
GTX 680 1300/7000
Lian Li PC V-2000
Another good reason to just get a GTX260. Though I don't support one side or the other. I think they're both good, both have their pros, both have their cons.
Originally Posted by inCore
i7-2600k @ 4.8Ghz 1.38v L044A892
ASUS P8P67 LGA
16GB G.Skill Rip Jaws DDR3 1600Mhz Memory
1/2" ID Masterkleer, Swiftech MCP-655, Thermochill PA120.3 Rad, XSPC Rasa, MCW-60
Cooler Master UCP 1100 Watt PSU
GTX 680 1300/7000
Lian Li PC V-2000
It was my understanding that the problem dnottis was having was vrm heat related with just Furmark.
As long as he is able to keep it under control he should not have any problems. GPU-Z or Everest revealing temps offered more insight to the problem then Furmark. If your games are running fine then Furmark offers no tangible benefit. This is my take on the situation so far. If I missed something then my apology.Here's a pic of mine with the MP-01. Idle 32, load 38c. The only issue I have is Furmark will crash, always had even stock settings / cooling. Would get a black screen after about a minute. I can game for hours without an issue.
Last edited by Eastcoasthandle; 07-28-2008 at 02:17 PM.
[SIGPIC][/SIGPIC]
i7-2600k @ 4.8Ghz 1.38v L044A892
ASUS P8P67 LGA
16GB G.Skill Rip Jaws DDR3 1600Mhz Memory
1/2" ID Masterkleer, Swiftech MCP-655, Thermochill PA120.3 Rad, XSPC Rasa, MCW-60
Cooler Master UCP 1100 Watt PSU
GTX 680 1300/7000
Lian Li PC V-2000
Sadly my HD4870 died tonight. I got some corruption while playing MOHA, then back at the desktop it just went green with some lines. RIP.
i7-2600k @ 4.8Ghz 1.38v L044A892
ASUS P8P67 LGA
16GB G.Skill Rip Jaws DDR3 1600Mhz Memory
1/2" ID Masterkleer, Swiftech MCP-655, Thermochill PA120.3 Rad, XSPC Rasa, MCW-60
Cooler Master UCP 1100 Watt PSU
GTX 680 1300/7000
Lian Li PC V-2000
will this cover all critical areas
http://ekwaterblocks.com/shop/produc...roducts_id=289
Oh, sorry for you. That was the second card or the one you wanted to RMA?
So heat could kill those cards. Any one used to electronics knows that even if some circuits are built to run at 125°C, they will for sure die quicker than if ran at 60°C or 55°C
One more reasone not to cut original heatsink, or your RMA will be voided
Maybe also mounting/unmounting without electrostatic protection killed your card![]()
Q6600 G0 L740B126 Lapped, 2x1Gb Kingston HyperX DDR2-1200
Gigabyte 8800 GTS 512Mb OC 756-1890-1000
TT Toughpower 750 W (W0116) new 8xPCI-E Rev.
Western Digital Caviar SE16 WD6400 AAKS rocks
WC: Swiftech H2O-Apex Ultra 220 GT + PA120.3 5v
OCZ XTC RAM Cooler, HR-05 IFX + 80mm FAN (NB), 2x HR-09U type 2 (mosfets), Modded Zalman ZM NB-47J (SB), Arctic-Cooling MX-2
Vista 32 bits
------------
- ASUS P5K Premium bios 0612: (3.84GHz 8x480) @1.432v
------------
- P5B Deluxe: 3.60GHz (9x400) @1.33v *** Old Setup (P5B deluxe)
OCCT 2.x Final Download
Bookmarks