"The ultimate measure of a man is not where he stands in moments of comfort and convenience, but where he stands in times challenge and controversy."
Dr. Martin Luther King Jr.
DIY: Self Clinching Nuts
Canon EOS 7D | Tokina 12-24mm f/4 | Canon EF 24-105 f/4 L | Canon EF 70-200 f/2.8 L IS Mk II | Canon EF 35mm f/1.4 L | Canon EF 400mm f/5.6 L | Canon EF 100-400mm f/4-5.6 L
Coming to this thread is a huge disappointment. Every time I see "new post" I think its a cool watercooled system someone wants to share. But no, its usually people completely ruining this thread by idle chatter that either belongs in PM's or an entirely different thread. Not one pic of a system on this page in 13 posts. Nice.
[SIGPIC][/SIGPIC]
....forgive me Father..
Slay the trolls.
That fc block looks pretty nice bundymania.
First time liquid cooling here
![]()
nice clean TJ07 setup you got there![]()
Sorry, I got to say this:
'Xtreme Systems can only please one person each day. Today is not your day... and tomorrow does not look good either.'
Modified the original saying.![]()
56k WARNING!!!
My rig consists of;
D-tek Fuzion
Swiftech MCW60
EK Multi res 150
Swiftech MCP 655
2x Swiftech MCR 320
Internals of my case resprayed Gloss white
![]()
Where's the PSU gonna be?![]()
Sub-Silentio: Stable 3.83Ghz:
---------------------------------------------------------------------------------------------------------------
| Intel Core 2 Quad Q9550 2.83GHz ....... | Lian Li V2010 ........... | DDC3.2 w/ XSPC Top ... | Bios .. 1104 |
| EVGA GeForce GTX 280 1024MB ........... | Zalman ZM1000-HP ........ | TFC 480 .............. | Vcpu . 1.36V |
| Asus Striker II Extreme nForce 790i ... | Razer Lachesis .......... | Zalman ZM-F3 ......... | V nb . 1.50V |
| Corsair XMS3 DHX DDR-1600 7-7-7-20 .... | Razer Lycosa ............ | D-Tek Fuzion V2 ...... | V sb . 1.50V |
| WD 300GB Velociraptor ................. | Hyundai W240D-PVA 24" ... | EK-FC280 ............. | Vmem . 1.90V |
---------------------------------------------------------------------------------------------------------------
All suggestions welcome - Overclocking tips here: http://www.xtremesystems.org/Forums/...d.php?t=208522
icrunk, rip of the shields on the NB and SB cooler, those only trap heat.![]()
Asus Crosshair V Formula-Z | FX 8350 | 2x4GB Trident-X 2600 C10 | 2x ATI HD5870 Crossfire | Enermax Revo 1050watt | OCZ Vertex 3 60GB | Samsung F1 1TB
Watercooling: XSPC Raystorm | EK 5870 Delrin fullcover | TFC X-changer 480 w/ 4x Gentle Typhoon | DDC2+ Delrin top | EK 200mm res | Primochill LRT 3/8 tubing
Case: Murdermodded TJ-07
sub 9 sec. SPi1M 940BE 955BE 965BE 1090T
i wanted to polish the mobo tray to a mirror finish.. but then i wasnt too sure how to.. so i left it how it is.
As for the green, those sleevings were from my old build.. and didnt have anymore sleeving left
Are they easy to take off? do i just pry them off? Will give it ago when i heatshrink all the fan cables next week![]()
Last edited by icrunk; 07-27-2008 at 12:58 AM.
icrunk - thats a nice clean setup, but isn't the water in your res making splashing noise when it hits the water surface?
Is it Feser uv blue additive or what?
Looks neat although I'm not too fond of the green cables(blue ftw)
lol... This forum requires that you wait 70 seconds between posts. Please try again in 8 seconds.
*phone rings*
Friend: Do you have a spare PSU lying around?
Me: No why?
Friend: My PSU just blew up, I think the second 8800GTX might have been too much for it to handle
Me: what PSU was that again?
Friend: Antec 480w
Me:........
Yes, very easy, it's just stuck with doublesided tape, just pry it off with a knife or a flathead screwdriver.
Here's a very nice guide:
http://www.thetechrepository.com/showthread.php?t=19
If only that P5W DH deluxe could do some nice FSB, i really loved it.![]()
Asus Crosshair V Formula-Z | FX 8350 | 2x4GB Trident-X 2600 C10 | 2x ATI HD5870 Crossfire | Enermax Revo 1050watt | OCZ Vertex 3 60GB | Samsung F1 1TB
Watercooling: XSPC Raystorm | EK 5870 Delrin fullcover | TFC X-changer 480 w/ 4x Gentle Typhoon | DDC2+ Delrin top | EK 200mm res | Primochill LRT 3/8 tubing
Case: Murdermodded TJ-07
sub 9 sec. SPi1M 940BE 955BE 965BE 1090T
I love this thread! After a few hundread pages of reading and
taking down ideas I completed my system so take a look -
I needed this top plate to cover up the mess i had made from my
previous build!
A couple with the lights on -
I know the Radiator's excessive and so is the PSU but i love it!
Forgot to mention the tubing is 7/16 Id on 1/2 OD barbs. Its a very tight fit so i don't believe
there's a need for clamps. The system was leak tested for 24 hours too.
Last edited by callen_1; 07-27-2008 at 06:46 AM.
callen_1 great, great great !
Love it, very clean.
![]()
We'll Keep the Red Flag flying high - Because Man United will never die
![]()
Very nice, looks like a lot of hard work has gone into that build, Great work!
very clean callen_1!![]()
very very nice fallen one!!!
almost mdpc worthy... only thing is that green pcb on the gfx
awesome build anyways!!
I have the same psu mate and i see you sleeved looks good may i ask how you did it? as i would like to do the same...How did you remember where they went as they not color coded...
CHEERS!
also what size dimensions are that case?
Bookmarks