Spent entirely too much time on wire management no doubt.
Spent entirely too much time on wire management no doubt.
ASUS Striker II Extreme 790i Bios 1202 PICS
Q9650@4.05 (FSB 450hz X4) Linked & synced.
Patriot Viper PC2000Mhz DDR3 4x2GB 8-8-8-22-1822
EVGA GTX470 X2 SLI
OS RAID 0 2X Intel X25-M 80GB 34NM Postville
Games RAID 0 500GB X2 ES 7200 32MB Enterprise
Silverstone TJ10 ESA
Swiftech MCR220 & MCR120 rads
D-TEK Fusion v2
Black Freezer NB/SB
EK's Acetal on Mosfets
1/2 R3603 Tygon Tubing
Corsair HX1000w
SoundBlaster X-FI TITANIUM - PCIE
Klipsch ProMedia Ultra 5.1
Dell 3008WFP 30' @ 2560x1600
Win7 x64 Pro
Yeah that caught me off guard..black fluid picked up left over green dye in my pump. Next flush I'll fix it.Originally Posted by RealRedRaider
ASUS Striker II Extreme 790i Bios 1202 PICS
Q9650@4.05 (FSB 450hz X4) Linked & synced.
Patriot Viper PC2000Mhz DDR3 4x2GB 8-8-8-22-1822
EVGA GTX470 X2 SLI
OS RAID 0 2X Intel X25-M 80GB 34NM Postville
Games RAID 0 500GB X2 ES 7200 32MB Enterprise
Silverstone TJ10 ESA
Swiftech MCR220 & MCR120 rads
D-TEK Fusion v2
Black Freezer NB/SB
EK's Acetal on Mosfets
1/2 R3603 Tygon Tubing
Corsair HX1000w
SoundBlaster X-FI TITANIUM - PCIE
Klipsch ProMedia Ultra 5.1
Dell 3008WFP 30' @ 2560x1600
Win7 x64 Pro
I cannot give exact numbers because Brisbane's on-die temp sensor is screwy. Core temp says ~33.5C idle on both cores and around 45C max load on both cores. If I had to guess it's closer to 43.5C idle, 55C max load. The GPU runs at ~50C at max load. This is with the components at stock speed; at the time of that writing it was overclocked however.
I will probably cut out that grill when I install a Phenom X4, as well as flushing out and refilling the coolant. At present it's 100% stable, silent (except the one non-SE16 HDD) and that is most of what I care about.
Stay tuned for my liquid cooled Socket 7 box.
2 years ago everyone had a different opinion
http://www.xtremesystems.org/forums/...ad.php?t=90561
@trfnj74
used a Laing D5 vario (Swiftech MCP655) at middle setting with the 2 gx2 blocks and the s2e ek set. had no problems.
well the mora2 is build for a huge heatload...don't think a thermochill could handle that at all but u will need fans with a well static pressure, the scythe kaze 3000 worked very well @7v
Last edited by sargatanas; 07-22-2008 at 09:25 PM.
2600k @ Asus M4E - Little Devil Case
Intel I7 965xe @ Evga E762 - Little Devil SS Case
2x Intel I7 E5620 @ Evga SR-2 - MountainMods ext Ascension watercooled
Intel I7 930 @ Evga E759 - LianLi V2000 air cooled
3R, save your money. That's a condenser style rad. Sure, it may be big, but it's very inefficient.....and the bends.
Circles SucQ!
If your annoyed by sigs telling you to put things in your sig, then put this in your sig
Bribery won't work on me...just say NO to AT!!!
Or just go with the car rad if you want big AND cheap
Not into xtreme builds anymore, just like to keep things silent.
Asus P6T Deluxe V2 - Intel i7 920 3.6 GHz - 6 Gb 1800 MHz DDR3 - AMD HD5850
haha.. that is friggin obnoxious...
looks like you're gonna need more than a D5 to push water through that thing...
and holy 1/2" to (2 inch?) conversion...
New work-in-progress - watercooled dual-rad Lian-Li A05:
http://www.xtremesystems.org/forums/...d.php?t=156162
Opteron 175 @ 3.0GHz
273x11
Nah, that would never fly for 3R, he's all about the bling and you could never find a car rad blingy enough.....unless BP comes out with a gold or nickel plated car rad from some Taiwanese car.Or just go with the car rad if you want big AND cheap
Circles SucQ!
If your annoyed by sigs telling you to put things in your sig, then put this in your sig
Bribery won't work on me...just say NO to AT!!!
Just finished building my Mozart:
Next month will change the CPU/NB tubing and add a Alphacool 2-bay Panel.
Maybe add a temp sensor on the EK res.
H/W
================================
TT MozartTX ## Asus P5Q-Deluxe, bios 1102 ## Intel C2Q Q6600/B3 2.40@3.20GHz 1.325V ##
4 X 1GB OCZ Reaper DDR2 PC-9200 1150@1200Mhz 5-5-5-18 2.18V ## Albatron GF 9800GX2 ##
Silverstone Olympia 1000W ## 2 x Seagate 160GB Raid-0 (XP pro x32) ## 2 x WD 500GB Raid-0 (Vista Ult. x32+x64) ##
Creative X-Fi Extreme Music ## K-World DVB-T 220 ## HP w2408h 24" wide ##
APC Back-Up RS 1500I ## Logitech Z-5400 THX 5.1 ## Logitech G15 .v1 ## Logitech MX Air
COOLING
===============================
CPU+NB loop
SWIFTECH Apogee GTX -> ENZOTECH SNBW-Rev.A -> SWIFTECH MCR320 -> EK Multioption 150 REV.2 -> SWIFTECH MCP655 DC12V
VGA loop
EK EK-FC9800 GX2 SLI Nickel Plated -> SWIFTECH MCR220 -> MAGICOOL Pumpstation 700 DC12V
MOSFETS+SB
ENZOTECH MST-81 heatsinks x 2 + ENZOTECH LSF1
Trigger5521 that is really nice.
I really like the green too, usually Im not big fan of green, but that looks good
Next gpu
Hi, i just bought a friends case that he has modded so i can have two tripple rads and a dual rad.
Rads and a new pump is coming soon, gonna make a dual-loop!
Last edited by begrip; 07-23-2008 at 03:52 AM.
24/7 Setup: Asus maximus x38 / E8500 E0 (500x8) Dtek Fuzion / Ballistix old rev 4-4-4-4 @ 1000MHz / 2900XT Ek fullcover cf / Silverstone TJ-07
Bench: Commando / Tpower i45 / P5K / E8500 E0 @ http://valid.x86-secret.com/show_oc.php?id=433935 / modded mach2 r507 / Old rev ballistix /
im trying to figure out how im going to run my loop, is it safe to have the EK multi option res upside down, so the single threaded hole is at the bottom?
Haha, that's true toughNah, that would never fly for 3R, he's all about the bling and you could never find a car rad blingy enough.....unless BP comes out with a gold or nickel plated car rad from some Taiwanese car.When I finished my Sonata II Resurrected loop, I saw how fast those bubbles went trought the system. Only bad thing about rad that big is that it takes days to get all air out of it.
Not into xtreme builds anymore, just like to keep things silent.
Asus P6T Deluxe V2 - Intel i7 920 3.6 GHz - 6 Gb 1800 MHz DDR3 - AMD HD5850
ya but you have to admit... it is an interesting shade of green... more like... pine... yea.. somewhat cool feeling color...
"The ultimate measure of a man is not where he stands in moments of comfort and convenience, but where he stands in times challenge and controversy."
Dr. Martin Luther King Jr.
DIY: Self Clinching Nuts
Canon EOS 7D | Tokina 12-24mm f/4 | Canon EF 24-105 f/4 L | Canon EF 70-200 f/2.8 L IS Mk II | Canon EF 35mm f/1.4 L | Canon EF 400mm f/5.6 L | Canon EF 100-400mm f/4-5.6 L
Here's my new rad (previous was a Mora, too much restrictive)
This one is bigger, flat tubes, full copper (5kg)
Overall : 560 x 440 x 62mm
Fins : 460 x 430 x 60mm
Need a 400mm fan to cool this, advice welcome!
LOL ! It is from truck or bus ? If yes send me modelHere's my new rad (previous was a Mora, too much restrictive)
This one is bigger, flat tubes, full copper (5kg)
Overall : 560 x 440 x 62mm
Fins : 460 x 430 x 60mm
Need a 400mm fan to cool this, advice welcome!
We'll Keep the Red Flag flying high - Because Man United will never die
Sorry, dunno exactly where it's from
Friend who found me this told me it could be from Mercedes...
Almost there
just waiting for my vc block to arrive and the completion of my case.
colours are very nice there ^ i wanna see finish pics
PTS,NCIX,PPCS *recommended*
- "Illusive Perceptions" - July-August 08 -
DFI LanParty UT->SLI
X2-3800 LCBIE 0618EPMW / AS5 / IHS Removed
EVGA 8600GTS SLi ! w/ FuZion GFX rev2
OCZ PlAtREV2. 2GB TCCD's | X-FI XTREME-FATALITY
CM 600W DUO | DD WaterWOODbox MODDED
UV1/2"LRT tubing.TDX Lapped.BIP120.2,yateLoons,
ddc.2+petras top, dd dfi nb block
rly sick
rider_2hip more more more
~~~~~~~~water ed ~~~~~~~~~~
Sry 4 my english
http://galeriawc.pl
MAGICOOL PRO III - 360mm Rad
EK SUPREME - Acetal WB
Dtek dB-1 Compact 12v DC Pump 500 LPH/20dBA
Alphacool Coolplex - 50 mm Res 500 ml.
Nanoxia FX 12 47,4 CFM/17dBA - 3*120 mm Fan
TT UV Green Tubing 10/14 mm
TT UV Green 1000 ml. + %10 Antifreezer
UVCC Light*2
Last edited by TheGanG; 07-23-2008 at 03:09 PM.
Intel DP55KG-Core i5-750-Kingston Hyperx DDR3 1800MHz-EVGA 9800GX2SC-High Power HPC 1000 G14C 1000W-HP W2448HC HDMI
Intel DP55KG-Core i5-750-Kingston Hyperx DDR3 1800MHz-Sparkle 8800GTX-SilverStone ST1000NV 1000W-Samsung T260HD
Slightly updated shots.
Need to pick up some sleeving crud so I can take care of the couple stray wires I've got.
Also need to break out the good ol dremel and cut a couple holes in the mobo tray.
aspire, that's my case
The Cardboard Master Crunch with us, the XS WCG team
Intel Core i7 2600k @ 4.5GHz, 16GB DDR3-1600, Radeon 7950 @ 1000/1250, Win 10 Pro x64
@aspire.comptech: any benefits on turning the hard drive upside down?
Posting Permissions
Bookmarks