Quote Originally Posted by yenclas View Post
Leeghoofd,

What do you think about my problem ?
try these plz :

DRAM Read Training: Disabled
MEM. OC Charger: Enabled
AI Clock Twister: AUTO
AI Transaction Booster: AUTO

CPU Voltage: 1.40000
CPU GTL Voltage Reference (0/2): AUTO
CPU GTL Voltage Reference (1/3): AUTO
CPU PLL Voltage: 1.52
FSB Termination Voltage: 1.26
DRAM Voltage: 1.96
NB Voltage: 1.28
NB GTL Reference: AUTO
SBridge Voltage: AUTO
PCIE SATA Voltage: AUTO

It's weird that the testing programs beahve so erratically... prime failing within minutes and OCCT going on for hours... I don't need as high voltages on my chipsets nor rams... try to alter one setting at a time... to find out where it could be... but again 1.4vcore is prety high with LLC enabled... CPu temps not an issue (although 45Nm is a pos to readout)

If this is stable then you can start to tweak again... but first you need to get this CPU stable sir

Quote Originally Posted by JHS View Post
Hmm. had to drop performance level from 8 to 10 with bios 1102 compared to 803
Anyone else noticed something similiar?
With which FSB ? ram speed ? Rams used ? I didn't notice any changes with my hardware, all my previous settings and pl levels booted fine liek before...