Quote Originally Posted by hartigan View Post
Alright.

Well I'm still having cores crap out at around 30 minutes.

The temperatures seem a little high but I'm not sure. I topping off at around 65c on cores 2 and 3, which I guess is OK if it's only happening at peak usage circumstances.

Below is a screenie of my Voltages, temps and Memory timings so you can see what I'm running and deduce what I need to change.


FYI, since you can't see it . . . I'm running my Core and NB GTLs at 0.67x like you suggested Zucker2K. I also lowered the vFSB from the 1.520V to the 1.504.

I'm definitely open to any solutions.

Thank you!!
Leave all of your previous settings intact and try this instead:

Set both GTLs to x67
Reduce FSBT to 1.28

Also, if you're having core failures, then you want to play around with vcore a bit. Especially if you're running prime blend (which seems to require more vcore for 4x2Gb than small ffts).