**Unified** DFI LanParty UT 790FX-M2R-M2RS / Phenom /Data Base Thread**

[justapost]

I ran the universe suite from the phoronix-test-suite with 10x250MHz vs. 12.5x200MHz yesterday. Means the CPU ran at 2.5GHz, NB and HT at 2GHz and only the mem at 400Mhz vs 480MHz with the same timings.

Here are the results.
http://global.phoronix-test-suite.co...4326-730-12625

@Final8ty: How far did the ref HT go at 1066mode, 203MHz? With two 1GB Tracers I maxed out at ~630MHz and ~615MHz stable. I'd be interested if it works better with just two 2GB dimms (assuming you use four).

Thanks man.When you resolve the cooling issues and have some spare time,test it in M3A if possible (and cool those mosfets! )
Are you sure about the chip degrading?Could it be a lower efficiency of your water cooling system-hence higher cpu temps and lower OCs,as you mentioned you had some issues with it?

Cheers!

Temps where high the first time i mounted the chip. I guess thats why my power consumption comparison results where that high. I thought i fixed it by reseating the D-Tek but it seems after a few hours of usage the temps went up again. Can be the chip does fluctate that much. At 2.6GHz only CoreDamage pushes the cpu temp to 60°C with prime95 i'm at ~50°C most of the time with air cooling (BigTyphoon).