Tt Mozart Tx build

**CoNMaN** · 04-20-2008, 12:38 PM

click for bigger pic´s

**Tw1st3d** · 04-20-2008, 12:53 PM

Nice build Con!

Like that you use some "other / non standart high end stuf" like the XSPC pump

**CoNMaN** · 05-04-2008, 04:54 AM

Some updates, mounted 3rd rad. Now 2 rad´s for cpu-loop.
Orded a DDC-1T with XSPC Res-top for gpu-loop.

(click for biggerpic´s)

**disruptfam** · 05-04-2008, 06:09 PM

looks good mate very nice work

**jamieuk23** · 05-04-2008, 11:56 PM

can we have your overclocking results please ?? 2 rads on cpu loop !!!!! isnt that overkill ?

**CoNMaN** · 05-05-2008, 02:37 AM

24/7 setup fan´s on low-mid settings. Will remount cpu-block some day...
On high settings i´m doing 4,5Ghz, this cpu does 5,4Ghz on DI

(click for bigger)

3dmark06 link:
http://service.futuremark.com/compare?3dm06=6583357

**jamieuk23** · 05-05-2008, 09:26 AM

how many pumps are you using on the CPU loop mate ?? I have the same case as you and I am considering going for a 2 loop setup rarther than a 1 on the CPU.

Did you notice much a dropp in temperture from going from 1 loop to 2 ?

Nice build mate !! Enjoy it !

**CoNMaN** · 05-05-2008, 09:58 AM

Originally Posted by jamieuk23

how many pumps are you using on the CPU loop mate ?? I have the same case as you and I am considering going for a 2 loop setup rarther than a 1 on the CPU.

Did you notice much a dropp in temperture from going from 1 loop to 2 ?

Nice build mate !! Enjoy it !

Thx!

Only one pump in every loop.
In the cpu/mobo loop i´m using a DDC 18W with xspc res top,
i´m waiting for att second DDC with xspc res top for the gpu loop.

Haven´t run the gfx and cpu/mobo in same loop...

**[XC] NetburstXE** · 05-05-2008, 01:27 PM

Beautiful

**CoNMaN** · 05-07-2008, 11:50 AM

thx m8

The second pump arrived today

More pic´s tomorrow!

(click for bigger)

**systemviper** · 05-07-2008, 12:49 PM

got to love those resi/pumps, did you start with them or slim down to them. i have 2
and they are the bomb!

love the build, that is a great case, almost got one till i saw the MM duality.

**HaCKs** · 05-07-2008, 01:37 PM

Hey conman, I have the same motherboard. How happy are you with the temps on the mosfets, NB and SB? Are any of them hot to the touch?

Was there any modification at all to get the 680i mosfet cooler to work? and the little sb fan? Can you give anymore pictures of those areas specifically (bright ones?)

thanks!

**CoNMaN** · 05-07-2008, 07:56 PM

Originally Posted by mcoffey

Damn nice build. Super clean and the best Mozart build I've seen to date.

Congrats on a great build, have a blast.

andyc

Thx m8, yes i´m happy with this build!

Originally Posted by systemviper

got to love those resi/pumps, did you start with them or slim down to them. i have 2
and they are the bomb!

love the build, that is a great case, almost got one till i saw the MM duality.

Thx!
No didn´t start with them, did slim down to them. They rule

Originally Posted by HaCKs

Hey conman, I have the same motherboard. How happy are you with the temps on the mosfets, NB and SB? Are any of them hot to the touch?

Was there any modification at all to get the 680i mosfet cooler to work? and the little sb fan? Can you give anymore pictures of those areas specifically (bright ones?)

thanks!

Real happy with the temp´s! Everything is could and running nice.

Can take some new pic´s this afternoon!
No mod´s for the mosfet cooler, is the top mosfet cooler that need´s mod.

Originally Posted by spotswood

Are the reservoirs on the bottom of the case?

Yes they are!
I turned the case upside down when i filled the loops.
So no air in my loops

**CoNMaN** · 07-05-2008, 05:09 AM

Will sone update to version 2.0 of my case.

Sleeving almost everything

**Bobly** · 07-05-2008, 05:31 AM

Quick Question: What Feser tubing are you using? It seems to be exactly what I'm looking for, transparent blue under normal lighting and UV reactive

I'm assuming it's this: Feser Tube - FT - Active UV Hose - ID 3/8" - UV CLEAR / BLUE
http://www.feser-one.com/site/produc...roducts_id=293
But I just thought I'd ask for confirmation

Edit: The alternative is this one: http://www.watercoolinguk.co.uk/cata...roducts_id=972
One is UV CLEAR / BLUE and the other is UV BLUE, I just would rather not end up with opaque tubes

**CoNMaN** · 07-09-2008, 12:03 PM

Originally Posted by Bobly

Quick Question: What Feser tubing are you using? It seems to be exactly what I'm looking for, transparent blue under normal lighting and UV reactive

I'm assuming it's this: Feser Tube - FT - Active UV Hose - ID 3/8" - UV CLEAR / BLUE
http://www.feser-one.com/site/produc...roducts_id=293
But I just thought I'd ask for confirmation

Edit: The alternative is this one: http://www.watercoolinguk.co.uk/cata...roducts_id=972
One is UV CLEAR / BLUE and the other is UV BLUE, I just would rather not end up with opaque tubes

Hi, this is the tube i got:
http://www.feser-one.com/site/produc...roducts_id=288
Feser Tube - FT - Active UV Hose - ID 3/8" - UV BLUE

**Bobly** · 07-10-2008, 04:05 AM

Ooo great to know

Thanks!

**CoNMaN** · 07-11-2008, 10:34 PM

Small update, Fuzion V2 and put the cover on 9800GX2

Next step is to sleev

(click for bigger)

**disruptfam** · 07-12-2008, 12:03 AM

clean up that dom fan mate

**CoNMaN** · 07-12-2008, 12:51 AM

I will

I´m going to take it all apart, when i´m starting to sleev everything

**Sunayknits** · 07-15-2008, 11:25 PM

Very nice work man! Always love to see another Mozart

p.s. that kitty avatar is CHOICE!

**CoNMaN** · 07-16-2008, 12:13 AM

Thanks

Just love my Mozart, big and nice.

Small update:Got rid of the BoosterX 3, sleeved the 24-pin, changed the ZM-MFC1-Plus fancontroler for a MFC1.

Don´t mind the "power on" cabel, it´s now hiden and I have cleand the ramcooler

Will put up a new pic later.

(click for bigger)

Thread: Tt Mozart Tx build

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions