Perhaps, it is modPi 8M WR : 01m40.750s by E8500 & TP45 HP

[youngpro]

congratulations newbeetle-san, i knew you would get your efficiency right,

i find this board to be great for 8m at high frequencies but not so great for 32m over 5.2ghz, but at 3.6ghz it is very fast

[NewBeetle]

Very beautiful score again! Congrats NewBeetle-san!

Thank you always, M8!

As always amazing result NB-san!
Nice to see someone benchin other SPI than 1M and 32M.

Thank you, nachthymnen-san.
Next, I will try 4M, 16M and PiFast.

No doubt, a very nice overclocking and result again .

Keep 8M ing, as Oliver said .

Tahnk you, M3kk-san.
I will challenge sub 100seconds @ 8M.

You never cease to amaze us Mr Beetle Astounding work as usual. Nice to see the NB isn't coldbugging. I had a serious issue with a GA X48 with only dice on the cpu which was causing the nb to cut out .

Nearly 6ghz A little more

Thank you, I34z1k-san.
Biostar P45 board seems to have no or very little cold bug.
Let's try Biostar.

nice work congrats .

Thank you, makaka-san.

Very nice work!
Good to see that TP45 HP is also able to offer the possibilities to hit such impressive scores

Thank you, Arne-san.
I love this board as much as FOXCONN BlackOps.

Congratulation~! 8M WR
Do you enter the Asus overclock competition?(July 28th and 29th, Hong Kong)
I expect to meet you.

Thank you always, OC_Windforce-san.
To my regret, I cannot participate in the competition this time.
But, duck-san and Cal930-san enter the competition.

congratulations newbeetle-san, i knew you would get your efficiency right,

i find this board to be great for 8m at high frequencies but not so great for 32m over 5.2ghz, but at 3.6ghz it is very fast

Thank you so much, youngpro-san.
If I have neither your fantastic 32M results nor your advice, I might have been overlooked the speed and the possibility of Biostar P35 boards.

DEWA DEWA
NewBeetle

[Spacemaster]

Is this mb need the vmod for Vdrop and vdroop?

[before]

Well done NewBeetle-san

[sobih25]

Great as always NewBeetle-san.

[TheKarmakazi]

very very nice NewBeetle-San!!! Too bad no 32M, youve got good efficiency there!

[dinos22]

wow amazing work
huge congrats

[NewBeetle]

Is this mb need the vmod for Vdrop and vdroop?

I think this mobo does not need the vmod for Vdrop and vdroop.
This mobo's vcore drop is very little : only 0.01v.

Well done NewBeetle-san

Thank you always, before-san.
Tweaks taught by you are very useful for me.

Great as always NewBeetle-san.

Thank you, sobih25-san.

very very nice NewBeetle-San!!! Too bad no 32M, youve got good efficiency there!

Thank you, TheKarmakazi-san.
32M is N.G.
But this system is good at Pifast and modPi 4M.

wow amazing work
huge congrats

Thank you so much, dinos22-san.
Without your advice and encouragement, I couldn't take this result.
Again, thank you very much for your kindness.

DEWA DEWA
NewBeetle

[MARCO74]

Congrats New Beetle san..

[ZoLKoRn]

Congrats for 8M Pi WR NewBeetle, you alway get the best results

[giorgioprimo]

keep pushing man !!!

[NewBeetle]

Congrats New Beetle san..

Thank you, MARCO74-san.

Congrats for 8M Pi WR NewBeetle, you alway get the best results

Thank you always, ZoLKoRn-san.
Next I wil try another Pi.

keep pushing man !!!

Thank you so much, giorgioprimo-san.
Yes, I will keep pushing!

DEWA DEWA
NewBeetle

[Vaulner]

That's freaking amazing, congratulations NewBeetle.

Regards

[NewBeetle]

That's freaking amazing, congratulations NewBeetle.

Regards

Thank you so much, Vaulner-san.
This is your 2nd post, isn't it?
It is very honored for me.

Regards

[Vaulner]

Thank you so much, Vaulner-san.
This is your 2nd post, isn't it?
It is very honored for me.

Regards

Hai, it is my second post, i hope i will post more.
The honor is mine, NewBeetle-sama

[gprhellas]

Bravo Tanaka-san, impressive results.
To bad that Biostar is not available here in Greece.
Did the chipset has problems... below -50C ?

[dinos22]

Did the chipset has problems... below -50C ?

youngpro's board chipset could run at -196C no problems

my one also had no cold bug issues at all...as i was pouring on top of stock heatsink

[NewBeetle]

Hai, it is my second post, i hope i will post more.
The honor is mine, NewBeetle-sama

Bravo Tanaka-san, impressive results.
To bad that Biostar is not available here in Greece.
Did the chipset has problems... below -50C ?

Thank you so much, George-san.
I also have no problem for the chipset temp.
My thermometer for chipset can be measured only up to -50 degrees.

youngpro's board chipset could run at -196C no problems

my one also had no cold bug issues at all...as i was pouring on top of stock heatsink

Many thanks, dinos22-san.

DEWA DEWA
NewBeetle

[gandalfone]

Newbeetle I was near to you
http://www.xtremesystems.org/forums/...6&postcount=22

[NewBeetle]

Newbeetle I was near to you
http://www.xtremesystems.org/forums/...6&postcount=22

Congrats your modPi 8M WR, gandalfone-san!

[gandalfone]

Congrats your modPi 8M WR, gandalfone-san!

Thx Master