-
#1 Mem Controller cannot be higher than HT link. If you try it will always set itself back to default of x10. <----Edit: I have this backwards
#2 The grayed out Mem voltage in AOD is normal.
#3 If you have tryed each stick one at a time and tryed another set of ram and still dont get a voltage increase when set. That realy leaves nothing but a problem with a PWM/VRM on the motherboard a physicaly defective part on the board unable to change voltage when requested. Before confirming this I would see if you can get a change of any kind ie...higher/lower switching from epp to spd and if still no changes in voltage of any kind it would have to be the board.
That may be what they replaced last time. I would research and see what the part was they replaced
oh ya, one more thing the PSU you ended up using, did you use a 24pin main and a 8 pin at cpu? if not this may lock out any voltage increases wich in turn the bios may be switching back to spd after seeing incorect epp volts.
Last edited by G0ldBr1ck; 07-07-2008 at 07:15 PM.
Particle's First Rule of Online Technical Discussion:
As a thread about any computer related subject has its length approach infinity, the likelihood and inevitability of a poorly constructed AMD vs. Intel fight also exponentially increases.
Rule 1A:
Likewise, the frequency of a car pseudoanalogy to explain a technical concept increases with thread length. This will make many people chuckle, as computer people are rarely knowledgeable about vehicular mechanics.
Rule 2:
When confronted with a post that is contrary to what a poster likes, believes, or most often wants to be correct, the poster will pick out only minor details that are largely irrelevant in an attempt to shut out the conflicting idea. The core of the post will be left alone since it isn't easy to contradict what the person is actually saying.
Rule 2A:
When a poster cannot properly refute a post they do not like (as described above), the poster will most likely invent fictitious counter-points and/or begin to attack the other's credibility in feeble ways that are dramatic but irrelevant. Do not underestimate this tactic, as in the online world this will sway many observers. Do not forget: Correctness is decided only by what is said last, the most loudly, or with greatest repetition.
Remember: When debating online, everyone else is ALWAYS wrong if they do not agree with you!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Reply With Quote
Bookmarks