I personally dont know what all the worry is about this 1.3v max on a QX is. I think thats a pile of BUNK! I've been running my QX9650 at 1.45+ for months and it still cooks right along. I have no scientific proof of course, just practicle exp......shrug

Here are my settings which should be kinda close for you.


Quantum BIOS Version G28

Overclock Phase Select - Manual O.C.
CPU Clock Ratio - 9x
CPU Clock Ratio +0.5 - Disabled
Target CPU Core Speed - 4053 MHz
CPU Clock (FSB) - 450 MHz
CPU Clock vs Memory Speed - 1:4 CPU333
System Memory Speed - 1800 MHz
CPU Clock Skew Control - 0 ps
CPU Clock Amplitude CTRL - 800mV
PCI Express Clock - 100MHz
PCI Clock - 33.6 MHz
Spread Spectrum - Disabled
Overclock Recovery - Enabled

All Voltage Control

CPU Voltage Multiplier - x1.000
CPU Voltage Setting - 1.4750
CPU Vdroop Compensation - Enabled
CPU PLL Voltage Setting - 1.584304
CPU VTT Voltage Setting - 1.350
CPU GTL Ref. 0 Voltage - +10
CPU GTL Ref. 1 Voltage - +5
CPU GTL Ref. 2 Voltage - +10
CPU GTL Ref. 3 Voltage - +10
NB Voltage Setting - 1.673
NB GTL Ref. Voltage - +3
SB Voltage Setting - 1.538
DRAM Voltage Setting - 2.044
DRAM Pull-up Voltage - +3
DRAM Pull-down Voltage - +3
DRAM Ref. Voltage - +3

Memory Timing Config

ECC Scrubbing - Disabled
DRAM Timing Selectable - Manual
CAS Latency Time - 7
RAS# to CAS# Delay - 7
RAS# Precharge - 7
Precharge Delay - 20
Row Refresh Cycle - Auto
Performance Level - 6
Write to Precharge - Auto
Write to Read Delay - Auto
Act to Act Delay - Auto
Read to Precharge - Auto
All Precharge to Refresh - Auto
Refresh Period Ratio - x1
Refresh Period - Auto
Command Per Clock - 1T
R2RD Same Rank - Auto
R2RD Different Rank - Auto
W2RD Same Rank - Auto
W2RD Different Rank - Auto
FSB Gain 1 - Auto
FSB Gain 2 - Auto
FSB Gain 3 - Auto
FSB Gain 4 - Auto
Blue DIMM Clock DLL Adjust - Auto
White DIMM Clock DLL Adjust - Auto
Blue DIMM Ctrl DLL Adjust - Auto
White DIMM Ctrl DLL Adjust - Auto
DRAM Command DLL Adjust - Auto