Your suggested settings for Blackops Quad @450fsb benching

[rdrash]

Guys,

I think it could be a good time for you to tell us some settings that will give us 450+ fsb on a quad core and 500+ on a dually.

The reason I consider this to be required is that this forum is rapidly becoming one of my blackops is not working as expected.

So time to come clean, you have the resources in the way of memory, cpu’s etc.

I have now been at my quad for 3 weeks with g26, g27 and now g28 none of which is giving a stable benching machine, by that I mean, set it up at say 440fsb 10 multi works fine, switch off, next day boot and it will not run at the settings it was happy with the day before.

I am on my 3rd PSU a Corsair 1000watt and now of the opinion that it is not a Psu issue.

Today I tried a dice session, failure, 400fsb 12.5 multi, boots goes to windows but fails system and 3dbenches,

I set up my Mars board; on dice 460fsb 11multi runs all benches without a problem.

It has been suggested that we sent our settings to you when having a problem; this is not a problem to me and would probably be very helpful.

If you could give me the Quantum force settings that should give me 450fsb on my quad QX9650, corsair 1800c7 ver3.1 memory corsair 1000watt psu, graphic cards have a few can be either pci ati9250 or pci-e 9800GX2.

Please include the voltage settings for use on water cooling, single stage, dice Ln2 will work out myself once I can get this baby sweet,

Thanks for reading, looking forward to benching @450fsb

I haven't hit 450 yet but I did some good work at 444 so far using ln2. I'm on my second BO board as I killed one earlier (solely user induced death) and had to wait for a replacement to arrive. I can link you to a page here that has settings for 440ish but I bet you've already found that page.

Shoot me a pm if you need that link and I'll be glad

here are the setting I used:

http://valid.x86-secret.com/show_oc.php?id=383960

M/B: Foxconn Black OPS retail (Bios 7A3F1G28.BIN)
M/B Bed: Navig custom benchstation
CPU: QX9650 (L739A637)
CPU cooling: F1 Extreme Edition cpu pot + LN2 / Temp:-140c
Chipset Cooling: Water on north bridge
Memory: G.Skill DDR3 1800 F3-14400CL7D 2 x 1GB
VGA:HIS 3870X2 Crossfire-X
HDD:WD 74GB Raptor
PSU:Silverstone Strider 1000W

Vcore: 1.96V (1.375 x 1.575V = 2.1656V @BIOS)
Vcpu pll: 1.546582V @BIOS
Vcpu vtt: 1.650V@BIOS
Vnb: 1.625V @BIOS
Vsb: 1.688V@BIOS
Vdimm: 2.210V @BIOS
MEM: 1:2 CPU400
CL7-7-7-18, 1T, Performance Level=6, Auto for the rest in BIOS

OS: Windows Vista Ultimate
Others: FSB440(x 13)@boot, set FSb increase to 444 for the cpuz shot, used 442 for superpi 1m run.
ambient temp 23c.