you won't find a sloution...trust meOriginally Posted by jugeen
unfortunately I don't have 2*2GB modules, so I can't help to find solutions.
you won't find a sloution...trust meunfortunately I don't have 2*2GB modules, so I can't help to find solutions.
Got a problem with your OCZ product....?
Have a look over here
Tony AKA BigToe
Tuning PC's for speed...Run whats fast, not what you think is fast
2000 should not be an issue with 2x1gb samsungs...X48 is still faster though.But 2x1 1600 and 1800 is nothing new. How about 2K at least 32M?
Got a problem with your OCZ product....?
Have a look over here
Tony AKA BigToe
Tuning PC's for speed...Run whats fast, not what you think is fast
i couldn't reach 2000 with GTR chips yet.
Hmm, I wonder why samsung and not Micron.
As you know priority for benchers is GTR because no other chips can run so tight timings and subtimings. I had a hope that P5Q3 will be a good DDR3 board for benching wolfdale but apparently it's not (yet).
The best candidates are still Blitz xtreme, P5K3 dlx (both discontinued), asus evolution and maybe a gem 790i
...
For the time being the safe bet for wolfdale extreme overclocking there's only one candidate, the Asus P5E64 WS Evolution.
Stunning board, great performance, and extremely high average FSB overclocks.
The P45 stars aka P5Q Deluxe, P5Q3 Deluxe, Biostar Tpower i45 and Gigabyte GA-EP45-DQ6 & GA-EP45T Extreme can reach high FSBs as well, but with the DDR3 issues at the moment they're not your best option.
Plus, the average FSB overclock "yields" are higher for the P5E64 WS Evolution. ( I've tested 11 CPUs on my P5Q3 Deluxe sample the last 4 days and I haven't managed to get a single CPU stable for 32M @ 600MHz FSB no matter what ( yes, it could be my bad luck on both the CPUs and motherboard picking ).
My hopes for high FSBs with the 790i are now gone, since my best stable FSB overclock on the Striker II Extreme is 575MHz, and the average is around 550MHz...
Coding 24/7... Limited forums/PMs time.
-Justice isn't blind, Justice is ashamed.
Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P.
Can somebody tell me why there is a difference between the to programs
what is the speed of my memory?
I have a single stick 1X2GB OCZ Platinum edition, and I keep getting BSOD in Vista. Has anyone here managed to stabilize this memory on the P5Q3 Deluxe yet?
Keep everything on "auto" include vdram if you over clock change just cpu volt
manuel timing
7
7
7
20
Neither do i
skulltrail | quadsli | 15K.6 | 30" | desktops are baaad!
ASUS just released 0904 BIOS, it looks promising. Tony or I will have more later today.
904?
where can I get it?
I got 902 only?
Im not handing the 0904 out, please don't PM me for it. I was asked to test and not leak the bios, so it stays that way until Asus say its ok to distribute it.
Got a problem with your OCZ product....?
Have a look over here
Tony AKA BigToe
Tuning PC's for speed...Run whats fast, not what you think is fast
What is with you guys and the Evo board, its just a cut down P5E3 Premium on the whole, is it not better to just use the daddy board and not the offspring?
Got a problem with your OCZ product....?
Have a look over here
Tony AKA BigToe
Tuning PC's for speed...Run whats fast, not what you think is fast
we love the challange! it is like masochism.
its more to do with manufacturers trusting each other, if someone tells me to test but not leak thats what i do, if they say test and leak out for you guys thats what i do.
Im not here to p155 anyone off.
Got a problem with your OCZ product....?
Have a look over here
Tony AKA BigToe
Tuning PC's for speed...Run whats fast, not what you think is fast
i do understand it, Tony!
looks good! E8400 @ 3.6
Last edited by THUMPer; 07-03-2008 at 11:26 AM.
This bios works for me.
http://fugger.netfirms.com/0904.zip
Test at your own risk, not official but most likely will be.
Post feedback please.
Intel 9990XE @ 5.1Ghz
ASUS Rampage VI Extreme Omega
GTX 2080 ti Galax Hall of Fame
64GB Galax Hall of Fame
Intel Optane
Platimax 1245W
Intel 3175X
Asus Dominus Extreme
GRX 1080ti Galax Hall of Fame
96GB Patriot Steel
Intel Optane 900P RAID
im using the 904 now.
Weird issue on overclock. if i completely shut down and boot back up, sometimes my OC doesnt stay. Like it was say Overclocking failed, press F1. Any insight too this? This was even before the 904 BIOS
this could happen when vdimm or vcore do not reach a voltage level needed to post.
New AI Tweaker option is in 0904 BIOS
CPU Margin Enhancement: optimized or compatible or performance mode
here are the differences between the three stages
optimized
compatible
performance mode
It's not a memory/system bandwidth related option mate.
I have an idea to test this option, and I'm also waiting for info from my contact.
Coding 24/7... Limited forums/PMs time.
-Justice isn't blind, Justice is ashamed.
Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P.
Alright. Then I have something to go off there. Thanks!
I can't get stable at a higher FSB with a lower Multiplier. I don't want to push my Vcore, and my NB voltage too high. I pushed the Vcore to 1.30 and NB voltage to 1.36. Even that was not stable. I don't know what a safe Vcore would be with this E8400, and for the NB. Apparently my screen shots were not stable. Prime 95 would error out in about 10 seconds.
Right now I'm at 3.6 with a 9 Multiplier, and auto NB voltage. VCore at 1.25 this seems stable. I would like to get close to 4GHz but not sure what to do. Am I missing a setting?
HALP!! haha
vNB 1.36v is not high at all. Run your CPU at stock speed with AUTO voltage, then run CPU-Z or Real Temp and find out your VID. Once you post that, I think people can get a clearer picture of what your CPU voltage settings could be for a higher OC.
Ol' Faithful - Retired...
- Foxconn BlackOps - E8600 @ 4.5GHz, 1.32v - 8GB Patriot Division2 @ 1600 8-8-8-20 - OCZ Apex 120GB SSD - XFX HD6870 1GB Black Edition - BFG Ageia Physx - ULTRA X3 ULT40064 1000w - Cosmos RC-1000 - Gateway XHD3000 30"
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
TOP SECRET:
- EVGA Classified3 - i7 950 @ 4.25Ghz on 1.30v - 24GB Kingston HyperX @ 9-9-9-24 1600Mhz - XFX HD6970 v1.0 2GB @ 950/1450 - Diamond HD6970 v1.0 2GB @ 950/1450 - XFX 9800GT - SB X-Fi Fatal1ty Titanium Champion
- 510 120GB SSD - CoolerMaster Silent Pro 1000w - Stacker 830 [Custom painted in Classified theme] - 3x 23" LG E2381VR SuperLED @ 5760x1080 - Yamaha RX-V371 Receiver - Martin Logan MTL-1 5.1ch Surround Speakers
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Silver Bullet
- ASUS M4E-Z - i7 3770k @ 5Ghz - 16GB Crucial Ballistix Elite - HD 7970 3GB - 2x Corsair Force3 120GB SSD [RAID0] - ULTRA X4 1000w PSU
Posting Permissions
Reply With Quote
Bookmarks