we've found THE GOLDEN ONEs : AMD Athlon64 World Record Thread!!

[ben rogers]

how do you go about breaking the 3000+ A64 record??? due to its 9x multi surely the htt needed would be way too much for most mobo's to handle, I know my 939 dfi lp ultra d wouldnt do more than 360.

i have a 3000+ venice that is E6 and has seen 2700 ish MHz on 1.45v but it runs at stock and has done for 3 years now! sometime I may try it on a mates board and see what it can do, on air though.

[knopflerbruce]

how do you go about breaking the 3000+ A64 record??? due to its 9x multi surely the htt needed would be way too much for most mobo's to handle, I know my 939 dfi lp ultra d wouldnt do more than 360.

i have a 3000+ venice that is E6 and has seen 2700 ish MHz on 1.45v but it runs at stock and has done for 3 years now! sometime I may try it on a mates board and see what it can do, on air though.

Could've been worse, I think you've got a decent chip. Not WR material, but still. My DFi Expert's and Venuses have all done way above 400MHz HTT even at stock chipset voltage. No idea how high they can go, always limited by the "coldbug" of the cpus on air...

I think so also

Knut, you are crazy !!!!
My time on socket 939 is also coming to an end....i sell almost all of my hardware to do some new things. but one setup with single stage and sli-d i will not sell to do here and here some good socket 939 action.

Hehe, no more 939 familty, then

Btw, just won an NBBWE 0601DPMW 3400+ Gianni-killer, perhaps? At least it's not worse than the E3 I tried a little while ago *praying for a dice-friendly coldbug*

[knopflerbruce]

Some new stuff arrived 3500+ Clawhammer CAA2C 0506GPMW, 3000+ Sempron NBBWE 0613DPAW and a CAB1E 0622EPMW 3800+. The last one is pretty decent, does 3130 stable at 1.34v and mid 40's load temp.

[stunned_guy]

The 3500+ clawhammer will sucks...i had one with 0507bpmw...you need LN2 for high clocks but this one has a terrible cold bug for an clawhammer around 260 mhz htt.
The 3800+ is very good under air and water but will sucks under cold because also of an very low cold bug....this should be 230 mhz or lower.

[knopflerbruce]

The 3500+ clawhammer will sucks...i had one with 0507bpmw...you need LN2 for high clocks but this one has a terrible cold bug for an clawhammer around 260 mhz htt.
The 3800+ is very good under air and water but will sucks under cold because also of an very low cold bug....this should be 230 mhz or lower.

I'll see what both those chips can do on air as soon as my SLI-DR arrives But I don't feel like testing more chips on this crappy A8N-SLI Deluxe.

I don't think the 3800+ has a coldbug that was that bad. I think 320mhz @ ~ 0 - +5C. That's what my other chip did, at least. I had 2 CAB1E 0639APAW's here, and a CAb1E 0620VPMW as well, at least one of those were quite good, too. Hopefully the 0620, as I remember your 0639BPMW had a REALLY nasty bug!

Crazy CB on that Claw, reminds me of my FX53 CAAEC It wasn't as bad as your chip, but awful compared to most others I've seen. Glad I just sold it, hopefulyl some CAAXC magic can outperform it (and your WR chip as well)

[stunned_guy]

That 0639 BPMW was very bad with cold bug....but under air the hell, you´re right.

Do you like to buy some chips from me ?

[socket]

my new AMD sample only for $33

[knopflerbruce]

I already have one of those, that's why I didn't go higher

I got a nice package from the USA today, btw. 2 quadcore ES's. Opterons. Socket F FAAHB GA 0720SPBW.

I also got an opty 160 with a core voltage of 1,15v, socket 940 btw

[socket]

i searching barcelona samples - 4AAAB and i can´t find it..

[71 (Bryan)]

holy cow, this thread is almost as old as my account =O

[knopflerbruce]

i searching barcelona samples - 4AAAB and i can´t find it..

I didn't get thos from ebay

[Dee]

Ah, old thread, but incredible clocks. And best of all, the thread starter was using desktop wallpaper made by myself. That's why he achieved such great clocks.

[stunned_guy]

But this thread is on the way down...most of us are running other systems...

I have only 5 FX processors left, all other cpus are sold. Is anybody here to will have an opteron 154 ??

By the way: ripping.org is down

There was one great 3000+ venice postet with more than 3.6 ghz...is there anybody who will kill me ?

[knopflerbruce]

But this thread is on the way down...most of us are running other systems...

I have only 5 FX processors left, all other cpus are sold. Is anybody here to will have an opteron 154 ??

By the way: ripping.org is down

There was one great 3000+ venice postet with more than 3.6 ghz...is there anybody who will kill me ?

Pfff, traitors!!!! I'll post here as long as there is some kind of discussion going on. Once a freak, always a freak.

PS: How good are your memory sticks (BH5)?

Edit: what 3000+ btw?

[socket]

http://cgi.ebay.com/Lot-Of-25-SKT-75...QQcmdZViewItem
only for knut

and younger than my D235 :p

http://cgi.ebay.com/LOT-of-4-AMD-OPT...QQcmdZViewItem

[Turrican]

http://cgi.ebay.com/Lot-Of-25-SKT-75...QQcmdZViewItem
only for knut

and younger than my D235 :p

http://cgi.ebay.com/LOT-of-4-AMD-OPT...QQcmdZViewItem

wow, nice es collection you got there.

[stunned_guy]

@ Knut
My sticks could do 275 mhz only But i also have one pair of geil one tccd that could do 285 mhz @ 2-3-3-5 that is great for tccd.

The 3000+ venice was an E6 and postet 3 days ago on ripping.org but now the side is down, gianni ia searching a new server. i dont know the stepping but its good enough to go on 3. place with single stage.

[gianni-gt]

yes ripping.org crashed the servers of the webhoster... the complete hoster was down. that makes me proud. i think that problem had youtube also at the beginning.

[[XC] Oj101]

Fx55 in my sig, 1.82v, ln2 cooled to about -40c, 3916mhz

http://valid.x86-secret.com/show_oc.php?id=384713

[knopflerbruce]

Fx55 in my sig, 1.82v, ln2 cooled to about -40c, 3916mhz

http://valid.x86-secret.com/show_oc.php?id=384713

That's pretty good, what about lower temps?

[[XC] Oj101]

Pretty good? I'm third on hwbot

Between -40c and -90c I struggled to hit 3.6GHz, at -100c and 2v it crashed saving validation at 3.94GHz and wouldn't POST again. I had insane condensation, so I think it might be a dead board due to that. I'll try it at stock in another board and let you know

Oh yes, I received your PM, I'll reply later today as I'm currently browsing from my phone.

[Turrican]

w00t, keep puhsing it bro

[MasterOfTheReal]

I still build (high-end once) A64/Opty systems for some people, they have stocks of power for most games and with the prices of 2nd had good clockers and DFI boards RAm etc its a good value for money platform in my eyes!

[knopflerbruce]

Pretty good? I'm third on hwbot

Between -40c and -90c I struggled to hit 3.6GHz, at -100c and 2v it crashed saving validation at 3.94GHz and wouldn't POST again. I had insane condensation, so I think it might be a dead board due to that. I'll try it at stock in another board and let you know

Oh yes, I received your PM, I'll reply later today as I'm currently browsing from my phone.

at 2v, it MAY just be your CPU that died I usually don't go over 1.8v unless I REALLY need it (or the chip is worthless crap that deserves to die). At some point above 1.8v, the risk of killing the CPU is quite high. Killed 3 or 4 at 1.9, but at 1.8 - NONE (and I bet about 100 CPUs have been tested at that voltage).

@ phillip - I just bought your FX53

[stunned_guy]

Congratulation, but could you imagine that i wont sell the cpu to you ???

@ OJ
Very nice result with that temps...