"ASUS P5Q Deluxe discussion".

[truehighroller]

I looked around and read reviews and this seems to be the deal with alot of overclocking potential to boot and my 9450 is deffinately a friendly overclocker so, I can't wait to open it up tomorrow. My Gigabyte motherboard that got zapped was holding it back big time.

[NBF]

Does anybody Know if Corsair RAMs with PROMOS chips work good on this board?

I'm planning to get a Dlx today if there are no issues with my RAM kits.

[TouGe]

I dont think there really needs to be any worrying about memory performance on this board, I can run PL 8 at 400fsb and 9 at 500fsb. Even though they are quite high (i could run PL7 at 500fsb on P35), I get better bandwidth out of this board then my P35. The only thing thats better on my P35 is memory latency but thats not far off at all and im sure it will get better with later bioses. Still tweaking for 24/7 optimal setup but will post results once i do.

At 400FSB you should be at PL7 not 8, what divider are you using? I've ran 4x1Gigs at 400FSB w/ PL7 on both the 5:4 and 16:12 divider w/o issue and I've used 2 sticks upto 450MHz @ PL7 on the 5:4 divider. The only time I needed a PL8 was when I was runnin 4x1Gigs @ 450MHz on the 5:4 divider but I might have overcome that if I'd run my NBv higher than the 1.26V that I was using at the time. I'm not sure though since I didn't test it.

[pmp]

ASUS P5Q Deluxe BIOS build 0803
Enjoy and report any bugs!

[Ruslan]

ASUS P5Q Deluxe BIOS build 0803
Enjoy and report any bugs!

Is this a beta or a final?
Thanks

[TouGe]

ASUS P5Q Deluxe BIOS build 0803
Enjoy and report any bugs!

I skipped the latest 07xx alpha/beta in hopes that this one would follow shortly, thanks greatly pmp. Will give it a go when I get back from work tomoorow.

[Alex-Ro]

Thanks.

[Mumid]

At 400FSB you should be at PL7 not 8, what divider are you using? I've ran 4x1Gigs at 400FSB w/ PL7 on both the 5:4 and 16:12 divider w/o issue and I've used 2 sticks upto 450MHz @ PL7 on the 5:4 divider. The only time I needed a PL8 was when I was runnin 4x1Gigs @ 450MHz on the 5:4 divider but I might have overcome that if I'd run my NBv higher than the 1.26V that I was using at the time. I'm not sure though since I didn't test it.

1:1 mate

[Leeghoofd]

Done some of the Everest ram tests again on this 0803 release, seems to me copy value sees a slight decrease together with latency that drops a bit here...
Plus 110 PCI-E Freq still results in a no boot...

[Ulver]

hey your link is broken, im very interested in seeing your result Ulver

i think its ok now

btw im with WC on cpu only

[Alex-Ro]

Actually no gains in fsm for me,it seems that my mobo become more unstable don't know that to say...waiting for others results.

[Mumid]

Does anyone know what the Aux temp read out is?

[Leeghoofd]

Maybe PSU ? I know mine is connected to the mobo and has a readout, I have 29°C aux at the moment...

Finally knackered 600FSB/1200 ram Superpi 32mb

[Mumid]

Maybe PSU ? I know mine is connected to the mobo and has a readout, I have 29°C aux at the moment...

Dont think my PSU has temp readout...

Finally knackered 600FSB/1200 ram Superpi 32mb

Nice work mate

[diablos]

ASUS P5Q Deluxe BIOS build 0803
Enjoy and report any bugs!

what are the fix?

[Chri$ch]

Finally knackered 600FSB/1200 ram Superpi 32mb

and how? tell it me

[gurusan]

600 fsb. Very nice. How much voltage are you giving the NB?

[Leeghoofd]

PL 13 bah :p 1.42NB 1.6 PLL 1.3FSB Term rest auto auto auto auto

I got this error when wanting to flash back to 0604 from 0803 for a test, tried reflashing the 0604 yet same error :



soz for the blurry piccie...

[eva2000]

PL 13 bah :p 1.42NB 1.6 PLL 1.3FSB Term rest auto auto auto auto

I got this error when wanting to flash back to 0604 from 0803 for a test, tried reflashing the 0604 yet same error :

[IMG]http://users.pandora.be/OAP/P5QDlx/IMG_3073.jpg

soz for the blurry piccie...

try renaming bios to just 0604.ROM or 0803.ROM and see if that works.. for as long as i had my P5K Deluxe, P5K3 Deluxe, Blitz Formula and Extreme all could downgrade bios via ez flash in bios and only thing i can think of is that i always rename my bioses on my USB flash drive so i can read their full name in DOS.

[Cob]

Probably a silly question, but how do you get the BIOS to see the USB flash drive? I can't get it to see any of mine.

[cincyrob]

im thinking ofgetting this board and replace my current GA-P35-DS3R mobo
i have the E8400 cpu want to put with it. is this a good board to run this CPU on?

leeghoofd
we have talked before about my temps is yours better on the P5Q deluxe?

[Ruslan]

Probably a silly question, but how do you get the BIOS to see the USB flash drive? I can't get it to see any of mine.

Plug it in before turning the power on, also make sure it is formatted in FAT.

[iboomalot]

Does this help??

ASUS P5Q DLX Template :

JumperFree Configuration Settings
AI Overclock tuner: Manual
CPU Ratio Setting: 8.5
FSB Strap to North Bridge: AUTO
FSB Frequency: 444
PCI-E Frequency: 101
DRAM Frequency: 1067
DRAM CLK Skew on Channel A1: AUTO
DRAM CLK Skew on Channel A2: AUTO
DRAM CLK Skew on Channel B1: AUTO
DRAM CLK Skew on Channel B2: AUTO
DRAM Timing Control: AUTO

1st Information :

CAS# Latency: AUTO -5
DRAM RAS# to CAS# Delay: AUTO -5
DRAM RAS# Precharge: AUTO -5
DRAM RAS# Activate to Precharge: AUTO -18
RAS# to RAS# Delay : AUTO
Row Refresh Cycle Time: AUTO
Write Recovery Time: AUTO
Read to Precharge Time: AUTO

2nd Information :

READ to WRITE Delay (S/D): AUTO
Write to Read Delay (S): AUTO
WRITE to READ Delay (D): AUTO
READ to READ Delay (S): AUTO
READ to READ Delay (D): AUTO
WRITE to WRITE Delay (S): AUTO
WRITE to WRITE Delay (D): AUTO

3rd Information :

WRITE to PRE Delay: AUTO
READ to PRE Delay: AUTO
PRE to PRE Delay: AUTO
ALL PRE to ACT Delay: AUTO
ALL PRE to REF Delay: AUTO
DRAM Static Read Control: Disabled
DRAM Read Training: Disabled
MEM. OC Charger: Disabled
AI Clock Twister: Light
AI Transaction Booster: Manual
Common Performance Level 10
all Pull-In of = Disabled

CPU Voltage: 1.38125
CPU GTL Voltage Reference (0/2): .630
CPU GTL Voltage Reference (1/3): .670
CPU PLL Voltage: 1.56
FSB Termination Voltage: 1.28
DRAM Voltage: 2.12
NB Voltage: 1.26
NB GTL Reference: AUTO
SBridge Voltage: 1.1
PCIE SATA Voltage: 1.5

Load Line Calibration: enabled
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Clock Skew : AUTO
NB Clock Skew : AUTO

Advance CPU Settings
CPU Ratio Setting: 8.5
CPU VID: don't see this ?????
C1E Suppport: enabled
Max CPUID Value Limit: Disabled
Intel® Virtualization Tech: enabled
Vanderpool Technology: don't see this ?????
CPU TM Function: enabled
Execute Disable Bit: enabled


put in my second stick of dominator and PRIME95 failed first iteration ran SuperPi for a few mins no failure
went back to Prime and at 13 trys and Failed

seems quirky but we will see CPU is only 3.8ghz so its not being pushed much

[flopper]

Probably a silly question, but how do you get the BIOS to see the USB flash drive? I can't get it to see any of mine.

has to be fat not ntfs file format on the usb.

[jVIDIA]

leeghoofd, that downgrade problem is due to the 0803 bios ?

And the 600fsb was not possible with the previous 070x bios ?