New to the site, very impressed with all the info and help !

Talking about help

I've got my Q9450 to 3.3Ghz on air so far and am having a few issues priming it, i get to about 3 - 4hrs and Vista 32bit freezes

I've been slowly upping the FSB Term and CPU GTL and it doesn't seem to be helping, didn't want to up the Volts of the CPU and NB anymore if possible.

Settings so far are

FSB Clock - 1650
DRAM - 900
CPU Ratio - 8
CPU Volts - 0.1250 (CPUZ = 1.26 idle, 1.22 load)
DRAM Volts - 2.20
NB Volts - 1.4
CPU GTL Ref Volts - 0.861 (think, will check)
NB GTL Ref Volts - 0.851
FSB Term Volts - 1.281

Everything else on Auto, all the usuals in BIOS are disabled.

OCCT's 1 hour runs fine, did multiple times, Temps with room temp of 18c get to 48c with Real Temp.

Question is do i need to keep playing with the FSB Term Volts and CPU GTL Ref Volts or am i heading in the wrong direction ???

Cheers