"ASUS P5Q Deluxe discussion".

[khaydin]

Prolly the same as the other boards : Here are the words of our GOD pmp :

USB resume after S3 fix, some EZRaid mods, minor DIMM driving changes

Oooo maybe my ram will be overclockable with the Dimm driving changes, can't even get my ram to 1080mhz without dumping tons of voltage into it when I know these modules are capable of a bit more with much less voltage.

[ZenEffect]

Oooo maybe my ram will be overclockable with the Dimm driving changes, can't even get my ram to 1080mhz without dumping tons of voltage into it when I know these modules are capable of a bit more with much less voltage.

odd... im running mine @ 1200 right now 2.2v on 704

[khaydin]

odd... im running mine @ 1200 right now 2.2v on 704

What are your ram timings? Did you have to drop them to 6-6-6-20 or something to that effect? I used to hit 1100mhz @ 2.15v and 1150 @ 2.18v using 5-5-5-15 on my old 680i board. I can't even get 1080mhz to successfully finish any memory stressing @ 2.25v on this board with all the memory enhancing stuff turned off. It MIGHT be that i have to drop the PL to 11 but I don't think I want to do that. I'm gonna see if I can do 8x500mhz with a PL of 9 like Leeghoofd and Mumid used a few pages back. I'd be happy with that performance.

[jVIDIA]

All I wanted was to have PL=7 @450fsb !

PL=8 @ 450fsb sucks big time

pmp, do you know where are the reading points for the SBridge Voltage and PCIE SATA Voltage (if they exist ) ?

[Vivi]

thats not that possible with a 1:1 ratio on your mems :?

Try keeping your strap at 333. then select the memory speeds after that.
strap 333 = 7 Pl and if your mem can handle it 6.
strap 266 = 6pl and sometimes 5
strap 200 = pl 5

[jVIDIA]

thats not that possible with a 1:1 ratio on your mems :?

Try keeping your strap at 333. then select the memory speeds after that.
strap 333 = 7 Pl and if your mem can handle it 6.
strap 266 = 6pl and sometimes 5
strap 200 = pl 5

Nope .... at least not with 2x2GB

[R@ptor =]]]

Hey guys!
i'm going to pick my p5q deluxe right now...
i am the first brazilian to use this mobo
8800gts in da house yet :P

[ZenEffect]

What are your ram timings? Did you have to drop them to 6-6-6-20 or something to that effect? I used to hit 1100mhz @ 2.15v and 1150 @ 2.18v using 5-5-5-15 on my old 680i board. I can't even get 1080mhz to successfully finish any memory stressing @ 2.25v on this board with all the memory enhancing stuff turned off. It MIGHT be that i have to drop the PL to 11 but I don't think I want to do that. I'm gonna see if I can do 8x500mhz with a PL of 9 like Leeghoofd and Mumid used a few pages back. I'd be happy with that performance.

5-5-5-18 trfc 55

trfc 55 was the key to clocking it up that hight though.