Asus P5Q3-Deluxe (P45)_625Mhz FSB_out_of_box

[pmp]

AC FSB TRY:

http://valid.x86-secret.com/show_oc.php?id=379953

Completely OOB mobo without any preps, seems to be nice enough for some high numbers as well.
Chasing ASUS Commando MB ? Possible, very easily:

http://valid.x86-secret.com/show_oc.php?id=379965

[jozzy]

Bios 0704

CPU: 1.20v
CPU GTL: auto
FSB: 1.26v
PLL: 1.54v
NB: 1.46v
NB GTL: auto
SB: 1.10v
PCIe: 1.50v

is it 0704 for P5Q3 also ?

[over@locker886]

Hi guys!
Finally got mine too. I was having frequent reboots with the default bios settings. Just managed to get it stable by setting Dram voltage to 1.94V manually.

@over@locker886:
As I'm a complete noob in OC, can you recommand some Oc settings, please? We both have same mobo, CPU and RAM . I'll try them and give feedback to this forum.

Bios 0702

Strap: 333Mhz
Ram ratio: 5:6
Dram Read/Write Trainings: Disabled
Mem. OC Charger : enabled
PF Level: auto
Ai Boost : Lighter
CPU: 1.20v
CPU GTL: auto
FSB: 1.46v
PLL: 1.54v
NB: 1.5v
NB GTL: auto
SB: auto
PCIe: 100Mhz

CPU Skew: +300ps delay
NB Skew: +100ps delay

CPU/SATA speed spectrums: disabled

[Chri$ch]

Asus P5Q-E Bios 0704

Bios Settings:

FSB: 625Mhz (up to 646FSB with clockgen)
PCIe: 100Mhz
Strap: Auto
Ram ratio: 1:1
Timings: 5-6-6-18
Dram static read control: disabled
Dram Write Trainings: disabled
Mem. OC Charger : enabled
PF Level: Auto
CPU: 1.2625v
CPU GTL: 0.61
FSB: 1.36v
PLL: 1.52v
NB: 1.52v
NB GTL: 0.545
SB: 1.10v
PCIe: 1.50v

Load-Line Calibration: disabled
CPU/SATA speed spectrums: disabled

CPU Skew: delay 300ps
NB Skew: delay 100ps



http://valid.x86-secret.com/show_oc.php?id=380746

[heliox]

Thanks a lot over@locker886 and Chri$ch for sharing your settings. That bios 0702, is it official?
I can see there are only 2 bios for P5Q3 Deluxe on their official site: 0611 and 0704. Did I miss anything here?
I'll try your settings this weekend.
By the way, I've put my 2 Sata2 Hard Disks on ICH10 ports(red) and the memory modules on orange slots. Is it ok, performance wise?

[over@locker886]

Thanks a lot over@locker886 and Chri$ch for sharing your settings. That bios 0702, is it official?
I can see there are only 2 bios for P5Q3 Deluxe on their official site: 0611 and 0704. Did I miss anything here?
I'll try your settings this weekend.
By the way, I've put my 2 Sata2 Hard Disks on ICH10 ports(red) and the memory modules on orange slots. Is it ok, performance wise?

Your welcome!

I'm not sure 0702 is official, but my settings good to for 0704.

Black ramslots better for me, and haven't any problem with 36GB WD Raptor + 160GB WD Sata.

[over@locker886]

Asus P5Q-E Bios 0704

Bios Settings:

FSB: 625Mhz (up to 646FSB with clockgen)
PCIe: 100Mhz
Strap: Auto
Ram ratio: 1:1
Timings: 5-6-6-18
Dram static read control: disabled
Dram Write Trainings: disabled
Mem. OC Charger : enabled
PF Level: Auto
CPU: 1.2625v
CPU GTL: 0.61
FSB: 1.36v
PLL: 1.52v
NB: 1.52v
NB GTL: 0.545
SB: 1.10v
PCIe: 1.50v

Load-Line Calibration: disabled
CPU/SATA speed spectrums: disabled

CPU Skew: delay 300ps
NB Skew: delay 100ps



http://valid.x86-secret.com/show_oc.php?id=380746

Impressive, nice job mate

What was coolig on cpu?

[Chri$ch]

Watercooling (water @ ~25-26°C)

[over@locker886]

Watercooling (water @ ~25-26°C)

Great!
What is the max with dual channel memories?
Did you tried with single cpu core? Maybe 650+..

[Chri$ch]

max with dual channel and 5-5-5-15 timings was 643FSB, so single channel didnt help much

how can i disable 1 core?

Thanks
Chris

[quake6]

Open msconfig (start>run),then go to boot.ini,advanced options and choose /NUMPROC= and set it to 1

[over@locker886]

max with dual channel and 5-5-5-15 timings was 643FSB, so single channel didnt help much

how can i disable 1 core?

Thanks
Chris

Nice in dual..I'll try again this mobo..

run-> msconfig> boot.ini -> special settings-> numproc=1

mod: quake6 was faster

[gandalfone]

I like see this fsb but performance?

By now I can spi32m PL13 at 600fsb....this result is not nice...

This spi32m contest 4Ghz...my best time with p35 ddr2(dfi blood) is 11'06''



This at 600fsb PL 13
Vnorth 1.36v
VTT 1.2v





Ops....sorry...I see now This Thread is for p5q3 LOL

[pippo369]

I think you must try at same cpu frequency.