I have tried putting the voltage adjustments up to 1.4v but this results in only 1.21v...which is still .05v over stock so it's a small increase and allows you to go to 725-750 core.
I have tried putting the voltage adjustments up to 1.4v but this results in only 1.21v...which is still .05v over stock so it's a small increase and allows you to go to 725-750 core.
|| 2500K @ 5GHz 1 thread, 4.8 2 threads, 4.7 3, 4.6 4 1.284V ||
|| P8P67-M Pro || 8GB @ 2133MHz ||
|| 5850 @ 1000/1225 || XFX 650W || Silverstone FT03B ||
|| 37" LCD TV || CM Hyper 212+ || Samsung 2.1 Soundbar ||
Could you post RBE frequency tab shot ? With 800mhz 3D core. When i try 800 or more than 700mhz, results is max 700mhzOriginally Posted by gurusan
You need to disable overdrive, otherwise CCC will force it back to 700mhzCould you post RBE frequency tab shot ? With 800mhz 3D core. When i try 800 or more than 700mhz, results is max 700mhzI did this mistake as well.
|| 2500K @ 5GHz 1 thread, 4.8 2 threads, 4.7 3, 4.6 4 1.284V ||
|| P8P67-M Pro || 8GB @ 2133MHz ||
|| 5850 @ 1000/1225 || XFX 650W || Silverstone FT03B ||
|| 37" LCD TV || CM Hyper 212+ || Samsung 2.1 Soundbar ||
Thanks, and for vGPU ? you just type ~1.3v for 3d settings voltage and it works ? Because i have only 1.17v in load ^^You need to disable overdrive, otherwise CCC will force it back to 700mhz
Posting Permissions
Reply With Quote
Bookmarks