ASUS P5Q3 Deluxe discussion

[zeuverclok]

chell shock 14400 cas 7 ( D9GTR)

[Pyr0]

Anyone else have this kit and needs some help post in this thread

http://www.ocztechnologyforum.com/fo...023#post278023

Nice 1 GAR, I'll definitely be following that thread
can't post there though as it's not allowed

So

Im testing 1600EB 4GB kit, had this ram well over 1800MHZ on P5E3 Premium.

1600 no way, 1500 no way, 1400 ish, 1333 jeez is it fast

This board is sooooo tight and must be at 1N by default it just hates 128IC's x16, to much load me thinks.

I will contat Asus and see what I can do with bios, for now try to keep the 4GB kits around 1333 6-6-6-(18>22 for TRAS) and test tRD at 6 or 7 tRFC can be 48 clocks.

This board is really fast with the ram like this, probably faster than 7-7-7-24 2T 1600 so do not think you are giving performance away as you are not.

more soon

Thanks for testing Tony, makes me feel much better knowing you're on the case

Today I swapped my quad out for my E8500 and tried your suggested settings with the OCZ3P16004GK kit.
1333, 6-6-6-22, 333 strap, tRD 7, 1.72V and 1.20V for the NB. (all skews, gtl's etc on auto)
These settings passed 3 complete loops of Memtest 2.01 and allowed me to actually complete a Windows XP x64 install.

I'm currently running HCI Memtest as I type. Hopefully it'll keep going


Doesn't seem very fast though


Thanks for the help so far Tony, looking forward to any more progress

[edit]
Memory error found copying between 0x24278f4c, 0x94048e38, difference =40000000
after 5hrs 56min

[Tony]

Nice 1 GAR, I'll definitely be following that thread
can't post there though as it's not allowed



Thanks for testing Tony, makes me feel much better knowing you're on the case

Today I swapped my quad out for my E8500 and tried your suggested settings with the OCZ3P16004GK kit.
1333, 6-6-6-22, 333 strap, tRD 7, 1.72V and 1.20V for the NB. (all skews, gtl's etc on auto)
These settings passed 3 complete loops of Memtest 2.01 and allowed me to actually complete a Windows XP x64 install.

I'm currently running HCI Memtest as I type. Hopefully it'll keep going


Doesn't seem very fast though


Thanks for the help so far Tony, looking forward to any more progress

[edit]
Memory error found copying between 0x24278f4c, 0x94048e38, difference =40000000
after 5hrs 56min

compare off a board running 2N to this one running the same cpu and ram frequency, then you see a difference