Quote Originally Posted by Cob View Post
What's your PLL set to?
1.58v

These are my current settings:

CPU Ratio Setting: 8.0
FSB Strap to North Bridge: AUTO
FSB Frequency: 450
PCI-E Frequency: 101
DRAM Frequency: DDR2-901 (1:1)

CAS# Latency: 5
DRAM RAS# to CAS# Delay: 5
DRAM RAS# Precharge: 5
DRAM RAS# Activate to Precharge: 18
RAS# to RAS# Delay : AUTO
Row Refresh Cycle Time: AUTO
Write Recovery Time: AUTO
Read to Precharge Time: AUTO

DRAM Static Read Control: DISABLED
DRAM Read Training: AUTO
MEM. OC Charger: AUTO
AI Clock Twister: AUTO
AI Transaction Booster: AUTO

CPU Voltage: 1.3625v
CPU GTL Voltage Reference (0/2): AUTO
CPU GTL Voltage Reference (1/3): AUTO
CPU PLL Voltage: 1.58v
FSB Termination Voltage: 1.32v
DRAM Voltage: 1.98v
NB Voltage: 1.22v
NB GTL Reference: AUTO
SBridge Voltage: 1.20v
PCIE SATA Voltage: 1.50v

Load Line Calibration: DISABLED
CPU Clock Skew : AUTO
NB Clock Skew : AUTO

@jas420221: That's what I'm hoping to achieve. Can't say I won't be happy settling for 3.66Ghz ... but I'd like to 3.8Ghz 24/7 Stable is possible at all.