Hi Magic,

I was running 4x1Gb sticks of OCZ PC3-16000C9 2000MHz at 1800 sync & linked (see earlier posts 868, 873 & 875) but backed them off to 1720 so that I could squeeze a bit more from the CPU and run tighter memory settings at CAS 7 and 1T command rate with the 0801 bios. Partly this reduction in FSB speed was also due to the NB temp reaching 70+ even after replacing the heatsink tape with arctic silver.

I have read somewhere that a 2000FSB can only be achieved with two DIMMS in A2 and B2 sockets but never managed to get a successful boot in either A1/B1 and A2/B2 configurations.