Official Core 2 Duo E7200 thread

[Leeghoofd]

Most reliable source of picking up a good cpu is the FPO batch nr... VID's help too but there's no REAL golden rule here. Print out my List and go with that too the shop or look around on the web and see if they have sortlike batches available...

List here :

http://users.pandora.be/OAP/wolfdaleOClist.xls

[Counter CS]

Awesome work Counter CS, I think you need to pump more volts into it.
does it run cooler now that with the IHS?

I have some problem to make my Thermalright ultra 120 xtreme make contact with my E7200 without IHS

What can i do to make a good contact now ?

I had so mutch work to take IHS off, and now it don't make contact with my cooler

[mojado]

Here is my E7200.




But....what program show the exact temperature???
IDLE:



LOAD:



Specs:
- E7200 with Evercool Iceman
- GA-P35-DS3P BIOS F10
- 2*1024 mb 1100 Mhz OCZ Gold
- MSI 8800GT OC 512 mb
- Seagate 320 gigas
- Powercooler 500W

Voltages: FSB, PCI-E, vMCH are normal; DDR2 @2,15v and CPU vcore 1,26 in BIOS.

[JamesBong420]

so the 7200 isnt soldered. are all wolfies just thermal paste? no solder?

[Hazaro]

so the 7200 isnt soldered. are all wolfies just thermal paste? no solder?

E7200 is "budget line" so it is not soldered on, much like the E4300, and I think E21xx.

E8400's are.

[mojado]

What´s the really TJMax for E7200?
95º or 105º ???



Thanxs in advance.

[Counter CS]

What´s the really TJMax for E7200?
95º or 105º ???



Thanxs in advance.

TJ for the 45nm is 95º

[Darknight]

good
Here is my 1 st start with the E7200.


The Temps are a little high...
I have a asus p5k-e with bios 1013, but i don´t Know some definition, because it is different from bios 603.
can help me?

Im portugues,and my Inglish is very bad
sorry, but I think it has to understand.

Sorry

[ZenEffect]

Dark, what type of cooling are you on? also the tjmax is wrong on coretemp. the temp is really around 43c so it seems about right.

[Darknight]

yes, the temp i think is around 43º, in realtemp shows 42ºC
but I am using Noctua -U12F

4000MHZ

[mojado]

TJ for the 45nm is 95º

Many thanxs man!!!

[L1m1t.NL]

I've got a question. I'm planning on getting a new rig including an E7200 and a Asus P5Q Deluxe. I'm torn between the memory, I have two choices: 2x2GB of PC2-8000 or slightly more expensive 2x2GB PC2-8500.

My question is; is it better with the E7200 to have it at for example 8x500 or at 7.5x533 (24/7)? Will I benefit alot of the higher FSB or is the difference unnoticeable?

[Leeghoofd]

I've got a question. I'm planning on getting a new rig including an E7200 and a Asus P5Q Deluxe. I'm torn between the memory, I have two choices: 2x2GB of PC2-8000 or slightly more expensive 2x2GB PC2-8500.

My question is; is it better with the E7200 to have it at for example 8x500 or at 7.5x533 (24/7)? Will I benefit alot of the higher FSB or is the difference unnoticeable?

I have not seen many E7200's that do 500FSB most users here are around 400-450FSB... secondly depending on ya ram of choice most PC8000 kits will do 1066Mhz too... i you do not feel comfy OCing ram go for the 8500 kits...
My Mushkin and Gskill PC8000 ram clock nicely up 1066Mhz or even 1081mhz no sweat... just set the correct TRFC (55) and you will be flying mate

[aiya]

i just got my e7200 and it has high idle temps




its all running stock, no oc. cooling is the Ultima-90 w/low speed 120mm yate loon in my sig. using latest bios for my DFI DK too. also reseated twice with same results. explanations?

[ferdz_33]

have you already set tjmax of realtemp to 95C or something? if not better read this thread http://www.xtremesystems.org/forums/...d.php?t=179044

cheers!

[Counter CS]

This is a 109€ CPU, and it can do the same as the big on€

Vcore: 1.50v
Temp: Idle 45ºC

Validação CPU-z: http://valid.x86-secret.com/show_oc.php?id=376671





Virou...

[Glow9]

This is a 109€ CPU, and it can do the same as the big on€

Vcore: 1.50v
Temp: Idle 45ºC

Validação CPU-z: http://valid.x86-secret.com/show_oc.php?id=376671





Virou...

Why do you have it at 3.9 in your sig? Different chip or Cooler?

[Darknight]

and my suicide Shot... in Asus P5k-E

vcore:1.48

[karl_eller]

Why do you have it at 3.9 in your sig? Different chip or Cooler?

Probably 'cause at 1.5v, it's a bench/suicide run, while 3.9Ghz is probably his 24/7 use.

and my suicide Shot... in Asus P5k-E

vcore:1.48

[snip]

Man, with nearly 1.5v, I would have hoped for a bit more than 4.3 Ghz.

Eller

[norris]

Got my E7200 yesturday, made a hugh difference updating the BIOS on my Abit p35-pro.

3800mhz @ 1.25V stable
3900mhz @ 1.33V stable
4000mhz @ 1.39V stable
4200mhz @ 1.4V not stable.
4300mhz @ 1.41 not stable

Im not happy with my temperatures thou, at 3800mhz its running ~40C idle, ~65C full load with a Tuniq Tower.

[ZenEffect]

i killed my e7200.
it was awesome.

Probably 'cause at 1.5v, it's a bench/suicide run, while 3.9Ghz is probably his 24/7 use.


Man, with nearly 1.5v, I would have hoped for a bit more than 4.3 Ghz.

Eller

you can push higher @ 1.5. more like 4.75ghz on my cpu before it bit the dust.

[NBF]

i killed my e7200.
it was awesome.



you can push higher @ 1.5. more like 4.75ghz on my cpu before it bit the dust.

Good chip you had! One of the best so far. I hate to loose good stuff.

Mine was a really bad one, wouldn't clock more than 4350 bench stable and needed 1,55V for Prime @4000. But the little thing is imortal, survived hours of hard benching @ 1,75V on aircooler

Now it's retired, running stock in a HTPC.

[ZenEffect]

Good chip you had! One of the best so far. I hate to loose good stuff.

Mine was a really bad one, wouldn't clock more than 4350 bench stable and needed 1,55V for Prime @4000. But the little thing is imortal, survived hours of hard benching @ 1,75V on aircooler

Now it's retired, running stock in a HTPC.

no worries. im getting a e8500 and another e7200 in a few days i REALLY want to break into the 9's on superpi 1m on this processor. now that i got a few tips i think its very do-able.

these cpu's LOVE the cold btw.

i have a 3dmark06 @ 4.75ghz if anyone is interested in seeing the screen shot. 20k

[mojado]

Actually testing 376x9.5 at 1,258v in BIOS. I set TJMax for safe reasons in 100º....it´s good idea??






Just a simple PI....

[aoch88]

There's a lot of Super PI screenies but anyone knows if it hits 4Ghz for a 24/7 or daily usage?