*Official Retail G0 Q6600 Overclocking Thread*

[khamo]

First of all disable DRAM static read, enabled makes your ram unstable at OC...
Then try to set transaction booster enable, Boost level 2 or 3 (see where you Get), this increases your ram performance.

Redo your TEST to find the max fsb can handle your mobo - cpu and if you want TRY also multi X9 to relax FSB on chipset....

400X9 = 3600 MHz also but your chipset may run cooler....
I have maximum stability when NB never pass 1.41V...

1) I cannot get stable with transaction booster enable. Cant even post at times, have rather stupid ram for OC
2) May try lower NB volts. I do have 4*1 GB RAM which stresses NB more
3) Would like to get 8*850 stable for higher memory OC at 1:1. If not, will fall back to 9*400
4 Tried Disable DRAM static read control. Still crashed P95 blend
5) Max FSB tried was stable at 475*7 for 3325 but with 2gb RAM only

[Dagalidis]

1) I cannot get stable with transaction booster enable. Cant even post at times, have rather stupid ram for OC
2) May try lower NB volts. I do have 4*1 GB RAM which stresses NB more
3) Would like to get 8*850 stable for higher memory OC at 1:1. If not, will fall back to 9*400
4 Tried Disable DRAM static read control. Still crashed P95 blend
5) Max FSB tried was stable at 475*7 for 3325 but with 2gb RAM only

Sorry my friend, i didnt see you have 4 Sticks of ram installed..
Yes, its Hard to OC with 4 ram modules and maybe you must get a better pair of 2x2 GB rams...

[=[PULSAR]=]

Got sick of it being too hot in my room and just installed my AC unit and came up with this. Still doing some testing to make 4ghz stable.

[khamo]

Sorry my friend, i didnt see you have 4 Sticks of ram installed..
Yes, its Hard to OC with 4 ram modules and maybe you must get a better pair of 2x2 GB rams...

Yes, but it passes Memtest many times over and 6 hours of OCCT mix. It must be NB needs more juice with 4 sticks even with relaxed timing.