Asus P5E3 Premium Wi-fi-AP

[soapman72]

I'm pretty sure the Corsair Dominators work just fine on this board, even in the 2GB variety.
As far as the MemTest, my OCZA RAM was throwing off errors left and right until I tested it with the default settings [ 1800Mhz at 8-8-8-24 with 1.95v for me]. You might want to test them at their rated specs.

I appreciate the tips. For the record, I have tried running the ram at rated specs. THIS particular kit won't come close. My previous kit would run at rated timings for acouple of weeks, then I started getting errors. I have tried every possible combination of voltages, gtl, skew imaginable.

If I drop the multiplyer on the CPU, the problems are still there. Problems are definately memory related. Could these boards really dislike this memory that much?

[Telo]

I appreciate the tips. For the record, I have tried running the ram at rated specs. THIS particular kit won't come close. My previous kit would run at rated timings for acouple of weeks, then I started getting errors. I have tried every possible combination of voltages, gtl, skew imaginable.

If I drop the multiplyer on the CPU, the problems are still there. Problems are definately memory related. Could these boards really dislike this memory that much?

That board will allow you to set your RAM to it's rated SPEC, it just will not allow you to boot into Windows with it. That will give you a chance to run MemTest and verify if the sticks are bad. I did it after all of them failed at 1600Mhz I knew all 4 sticks couldn't possibly be bad.