32m SPi Low Clock Challenge

[koda]

10m 59.485 @ 3995.1



Hard to challenge 3oh6 with sub-500 FSB ... i think

[3oh6]

Can I post a "warm-up" for 10:xx category, please? No copy-waza or maxmem yet.

Just some whimsy 9-9-9 action

http://www.clockmehigh.com/TestingAt...133C9DF-ES.gif

any and all action is more than welcome

i am just doing some 1000MHz+ CL7 32m testing right now so expect some fun updates here hopefully...and in the Ballistix PC3-16000 OC Report

Hard to challenge 3oh6 with sub-500 FSB ... i think

thanks but your right, high FSB plays a large role int he performance...some chipsets more than others too. i know one that loves FSB and high memory clocks in 32M

[3oh6]

every time i come back to this thread i have to spend some time on a clock and since i was just working with this Ballistix kit at 1000MHz 7-6-5, i figured i would test it against some other setups...the results were good

E8400 (Q808A476) 7 x 566 (boot at 566*7)
Chilly1 Single Stage (tired and in need of tuning/recharge)
EVGA 790i SLI Ultra (P04)
Swiftech MCW30/PA 120.2/DD5 // P5B-Dlx SB (SPP // MCP cooling)
Ballistix 2x1GB PC3-16000 CL9
Biostar 7600GS
Seagate 7200.9 80GB SATA2 (10GB partition for OS/SPi)
ERAM v2.11 (transfer CW file to & page file)
Silverstone Zues ST56ZF 560W
WinXP Pro SP2 (custom nLite'nd job)

realtime / core 1
maxmem = 630
copywazza = 1GB (folders with 1MB file in each) from C:\ > Z:\ > C:\ > Z:\

visual effects all off
memory usage = "System cache"
processor scheduling = "Programs"
page file = 300MB/300MB Z:
plenty of services disabled but not all

3961.8MHz SPi 32M = 10m 59.016s
click for full size including memset...

[Gautam]

vdimm? That's looking awesome.

[3oh6]

vdimm? That's looking awesome.

shoot, i knew i was forgetting something. vDIMM = 2.197v DMM from the DIMM slot, ground on the lower rear MB mounting hole.

looks to be topping out for single 32M at around 1010MHz 7-6-5 with all other sub timings the same as the screenshot above at 2.197v.

[gandalfone]

Very nice 3oh6

[yankee]

So many Divisors on that 790i, must be nice!
Great result, 3oh6 Very efficient!

Here's my best shot so far.
14m57s375 @ 2992.5
P5K SE FTW!

[Kabauterman]

Hey mates,

here is my best run



I think it is very efficient for QX, ASUS P5E64 WS Evolution is a great board and realy fast!
Only thing what suxx is the Mem Dividers, so with 1:2 is 900 MHz the best what I can get.

[DJSUB]

Time Zone: 17.xx Update
Proc Speed: 2392.2 MHz
Actual Time: 17.58.657s
Multiplier: 6 x 398
Ram Type: DDR2
Ram Speed: 956 mhz
Ram Timings: 4-5-5-13
Divider: 5:6
Processor: Intel Core 2 Duo E8400
Chipset Used: P35
CPUZ Validation : http://valid.x86-secret.com



Just Tripping!

Pinoy Powah!

[DJSUB]

Time Zone: 18.xx Update
Proc Speed: 2250.7 MHz
Actual Time: 18.59.109s
Multiplier: 6 x 375
Ram Type: DDR2
Ram Speed: 900 mhz
Ram Timings: 4-4-5-13
Divider: 5:6
Processor: Intel Core 2 Duo E8400
Chipset Used: P35
CPUZ Validation : http://valid.x86-secret.com
Full Screen :



Just Tripping!

Pinoy Powah!

[dduckquack]

cant wait for you to have ddr3 fafs!

[koda]

12m59.891 @ 3279.7



Always so close to 3oh6 ... i definitly need another chipset to challenge you !

[monteboy]

Monteboy, is your spi tweaker shared to everyone? . How can i find it?

http://www.xtremesystems.org/forums/...&postcount=356

[sobih25]

some updates by me & pmp.

e8500 + pmp's d9gtr + p5e3 premium

10.xx


11.xx


i've tried to challenge 3oh6 at sub10 category, but it's really hard with such low FSB and RAM. impossible?



sub13 isn't possible because 6,5 multi doesn't work. 7 multi = low fsb...

don't know why my loops after 13-15 are much slower than any other lowclock challengers there

monteboy's tweaker works fine, but i need more runs to test better performance settings.

[3oh6]

hot damn, nice work guys. the P5E3-Premium is such a monster at 500FSB, it really is a shame i am having no luck at all with mine. i don't think i will be able to touch those with the 790i unless i find time in my tweaks because the hardware is absolutely maxed at this point. i will do an update in the next couple of days. i have a little bit more on my plate i need to clean off before i start having fun again

[gandalfone]

Very nice score sobih25

PL6 is hard....I take with PL7 12'09''

Is north at air? Vnorth?

Thx

[sobih25]

aircooled ofc, just used noisy delta fans. vnb 1,69v-1,72v from bios. that's all.

[dinos22]

you guys are doing really great
so bloody fast
that RAM you have is amazing

[monteboy]

some updates by me & pmp.

e8500 + pmp's d9gtr + p5e3 premium

10.xx


11.xx


i've tried to challenge 3oh6 at sub10 category, but it's really hard with such low FSB and RAM. impossible?



sub13 isn't possible because 6,5 multi doesn't work. 7 multi = low fsb...

don't know why my loops after 13-15 are much slower than any other lowclock challengers there

monteboy's tweaker works fine, but i need more runs to test better performance settings.

If you use the SpiTweaker please show it on your Screenshots that all other people can see which Waza settings are used.

I build a smaller GUI Version , check this -> http://www.xtremesystems.org/forums/...&postcount=379

[sobih25]

used 600mb 1024kb files.

[dinos22]

i tried to use this spi tweaker and it's a bit weird
when i look at my system available memory it's maxed out but cached memory size is at a bare minimum

i've tried with and without CDT and also with smaller file size
but it doesn't look right and at same settings monte is on for 11m run i'm a few seconds slower

[monteboy]

@Dinos22

If you want balance mem & cache try larger Waza. 1840 MB & 1024KB filesize
+ CDT. For me the balanced system was not the best choice. I have better results with smaller Waza & sngle file size.


Try Dino different Parameters , there are many factors that affect Spi32M time. Such Partition Size , MaxMem , pagefile size & location.

Parameters which are good for my systen should not always be the best for others.

[sobih25]

I've not check any balance between total/available ever.

[dinos22]

daaaaaaaaaaaaaaamn
i just did a flat 12m time at 3627MHz lol

i'm too tired for this now lol
gotta hit the bed hehehe

[dinos22]

i will try to do some Pmem tweaks to beat hipro5 in sub12m category