Water Cooled Case Gallery

[inCore]

does anybody know the dimensions of one dual rad ? not the full rad but the part that we cut from the cases :p i want to put a dual in the roof of my stacker bat i have my dual on the bottom of my stacker and i cant take it out now because i need the pc running

the blue lines those dimensions i need if anyone has a spare dual rad please

*pic*

Here you go:



This is from a PA120.2 so the out dimensions are different and it has rounded inner edges like I marked out in red.

[Vatos_locos]

Here you go:

This is from a PA120.2 so the out dimensions are different and it has rounded inner edges like I marked out in red.

thank you sir

[nullface]

Thats not a PA120.2
http://www.thermochill.com/guides/PA120-2.pdf

[xpatar]

For those that remember rev1 earlier: http://www.xtremesystems.org/forums/...postcount=8482



Here is a rev2, not quite complete. Not sure what I think about the blue powder coat I chose. The flash on this camera makes the blue look a little more pale that it actually is. You guys think the outer radiator shroud should be blue also? Other comments? (beside me puting the CPU block inlet on the top, or the ApogeeGTX top non copper) I welcome all comments and suggestions. I'm not liking the blue personally...I like rev 1 better colorwise, although for rev 2 I finally got my tubing, wiring, and such the way I want it.

Rev1 with black and red looks much better.

[froste]

I finally finished my TJ09 build.

[adidassler]

[johnp1983]

just some pics maded quikly cause my camera's battery are gone!!

[The[R]eaper]

@ XPatar Nice TJ07 i like both versions im a sucker for that shade of blue.

[junkun13]

@adidassler

great pics!

[TheGanG]

A few changes in my Lian Li... New 1000 Watt PSU and an aluminum/acrylic reservoir+two pumps (inside it)... No way to pull up BIOS bridge Actually i have a new case; Cosmos 1000 and working on it now and hope to pick it up soon...

[ka lok]

Got bored and took some more pics!!!

[disruptfam]

adidassler srsly! awesome pics mate far out !

what the camera? i need to purchase it asap

[MomijiTMO]

Nikon D60 from .exif

[Atal]

so here is my pc just 2 pics right now

[MADEEE]

The rad wont fit inside the top of the case,because of the other graphics`s card .even with no fan`s on the inside..and don't really want to move the bottom lay out to much at the minute,so that`s why i have put the rad out side,till i decide what i`m doing with the motherboard and graphic`s card`s.all so will be changing the rubbish read sata cable`s`..lol

[taylormsj]

Made that looks sweet. I would change your loop order tho, i dont like the idea of the pump feeding the single rad and then the resevoir, i think your flow would be a lot better if your res fed your pump
Love the case

[CarNabY]

Work in progress .............









To be continued

[PilatuS]

@CarNabY.

Damn that looks sweet !

I really like the setup as it is right now. Nice green water and green fans, great SLI setup in a beautiful Lian-Li. Keep up the good work !

[Astratuner]

Got bored and took some more pics!!!

hey ka lok,


how did you fit the 120.3 in the bottom?

Using some wood?

[wra1th]

CarNabY, looks nice
What pump do you use in your system(loop?)? I think it isn't laing, but which? What temperatures do you have?

[DarK Nerevar]

That pump is a SANSO PDH 054

[ka lok]

hey ka lok,


how did you fit the 120.3 in the bottom?

Using some wood?

Nope, using 4 door stops like these and screwed them in from the bottom of the case to the rad. Bit fiddly but totally secure

[CarNabY]

CarNabY, looks nice
What pump do you use in your system(loop?)? I think it isn't laing, but which? What temperatures do you have?

Excellent for single loop and many Waterblock

[inonefly]

here's my stacker 831, first loop finished, will add a second loop for nb/sb/mosfet later

[ls206]

!! I love the heatsink poking out of the IO shield and getting cooled by the exhaust! haha n1