Quote Originally Posted by Rob Halford View Post
Random BSOD with Load Line Calibration set at Performance, also during boot. Set at Normal (or Auto) everything is fine. However, when set to Normal it appears that CPU voltage fluctuates like hell (at least according to CPU-Z 1.45) - varies from 1,424-1,452 when set at 1,487 in BIOS).
Yes, now i set auto or normal


Quote Originally Posted by Holmer View Post
I have experienced the same as both camouflage and Sav. Earlier I posted that I have primed 7 h a 400x10 with LLC on Performance. Later it restarted during some file copying and was unable to boot to windows at the same settings.

Another thing that bothers me is that I have powered down, switched off the PSU and unpluged the cable - when I power up again I sometimes get a "CPU ratio something" error (press F1/F2). This can happen with CPU, FSB and RAM at default settings - no OC. Anybody else experiencing this? I hope I'm not running into another Striker II Extreme hell of inconsistency
I have this problem when I set FSB STRAP Manual, if I set auto the motherboard is very stable.