Ok, i thought there was some faulty
were do you get this 3600+ clawhammer ? i never heard of it. can you show me one picture of the cpu please ?
hehe you are on place 5 with the 3400+ venice![]()
Wanna see a crazy cooling-project? check-out my FRIDGE-CHILLER or OCTS + Monstertube or OCTS + 230L LN2 + GPU SuperTubes or SUPER-SLOW-MOTION OC VIDEOS
![]()
I forgot to say where I get the 3600+ fromThe one I tried 2 days ago was from the dude who sends me all those Axxxx-chips. The other one was something I got on ebay. Unfortunately, the seller had an FX55 AAAXC as well which I wanted - but I had no chance to get it as it went for 250 bucks!
The 3600+ I tried this time is a PAAPC 0401. The other one is PAAPC 0350I hope I get it within a couple of weeks.
3000+ winchester in the mail last night, btw. CBBFD 0441TPMW.
I tested my second Opteron 185 LCBBE 0628 BPMW....3600 mhz with 1.472 volts only for the first testsshould do 3.8 ghz i hope.
-22c was the best higher there will be cold bug. now i will test some moremax temp is -35c with my single stage in windows.
you´re right....that is my first opteron 185 LCBBE 0628 BPMW. it dies with 1.68 voltsyou can see it in the picture....under the die there you can see a small black point...thats silicone. it smells horrible
-18c is to "hot" for the cpu and it freezes or shut down. i need around -22c....
now i have 3779 mhz with 1.664 volts only and there is no end....can run superpi 1m with around 3.6 ghz by the way....what a chip !
when do you get your opteron 185 models ? i need some comparison.
disable one core and you'll crack the 3.8ghz![]()
Wanna see a crazy cooling-project? check-out my FRIDGE-CHILLER or OCTS + Monstertube or OCTS + 230L LN2 + GPU SuperTubes or SUPER-SLOW-MOTION OC VIDEOS
![]()
CCBBE 0613RPMW: http://valid.x86-secret.com/show_oc.php?id=365628 Opty 185 @ 3562MHz / 1.63v / 39c/45c
Best spi screen I got is attached.![]()
awesome. hey I'll be joining you guys when i throw my 185 under SS. lcb9e 0742cpmw. 59°C tcase, very temp sensitive. gonna be interesting.
Ryzen 9 3900X w/ NH-U14s on MSI X570 Unify
32 GB Patriot Viper Steel 3733 CL14 (1.51v)
RX 5700 XT w/ 2x 120mm fan mod (2 GHz)
Tons of NVMe & SATA SSDs
LG 27GL850 + Asus MG279Q
Meshify C white
why can core temp not read out the tdp ? i have the same problem with the opteron 185 only.
@ biohead
LCB9E will sucks under coldness.
New Castle(?)
ADA3500DEP4AS
CAA2C 0505 FPMW
Any good?![]()
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
I dont know...try it then you will know it
@ Knut
I have no water cooling so I have to do SuperPi with single stage only.
Ryzen 9 3900X w/ NH-U14s on MSI X570 Unify
32 GB Patriot Viper Steel 3733 CL14 (1.51v)
RX 5700 XT w/ 2x 120mm fan mod (2 GHz)
Tons of NVMe & SATA SSDs
LG 27GL850 + Asus MG279Q
Meshify C white
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
Its an Clawhammer not Newcastle because of the AS --> Clawhammer. Newcastle has AW at the end of the line.
I have here an CAA2C 0507 BPMW --> needs coldness but I have no LN2 to test it out. Cold bug is not very high around 270 mhz and -28c.
@ Knut
I tested the opteron 185 today again but couldnīt kill your score. More voltage isnīt the keyMy best result was 3788 mhz with 1.68 volts...
But prime will runs with 3200 mhz and default vcore
The temperature between the two cores is around 20c under load.-8c to -28c
![]()
Ryzen 9 3900X w/ NH-U14s on MSI X570 Unify
32 GB Patriot Viper Steel 3733 CL14 (1.51v)
RX 5700 XT w/ 2x 120mm fan mod (2 GHz)
Tons of NVMe & SATA SSDs
LG 27GL850 + Asus MG279Q
Meshify C white
Bookmarks