Crucial 10th Anniversary sticks

[bonzo_catalin]

Hmmm

http://valid.x86-secret.com/show_oc.php?id=333714

[ANP !!!]

That's some sweet RAM, whats the voltage ?

[l33t p1mp]

Damn, thats fast as hell. The farthest I could push mine was 1150 @ 5-5-5-14. Pretty nice for 800 modules though.

[bonzo_catalin]

That's some sweet RAM, whats the voltage ?

Asus P5K SE provides 2,1V maxim , so i set auto

Damn, thats fast as hell. The farthest I could push mine was 1150 @ 5-5-5-14. Pretty nice for 800 modules though.

What 800 ?

[l33t p1mp]

Lol. I gotta see if I can pull 1200 out of them tomorrow.

[Xvys]

Unfortunately, the party is over for my 10th Anniv. ram. After a year or so of moderate 24/7 use @ only 2.1v (560 MHz) my system would not cold boot anymore. Turns out one of my 10th Anniv. modules was rife with errors when o/c'ed, even at 500 MHz. Of course, these are 333 MHz ram, but they had been running reliably up to 650 MHz. The defective module still runs error-free at stock, so I wonder if I can still RMA it? (Gee, Crucial it won't o/c as high as before??)

I have subsequently bought a used set of PC6400 Tracers (double-sided ) off EBay, which are almost as good as the 10th Anniv, but then again I won't risk 2.45v on the new ram like I did with the 10th Anniv in testing, as these may be hard to replace.

The new single-sided Ballistix will o/c nearly as high, but with a 52 Trfc, nothing lower, while my 10th and Tracers will run at 25 Trfc at over 1200 MHz. That is the main difference it seems with the new modules.

Here is a one screenshot of this tremendous ram in action. The Performance Level was boosted to Enabled: 2, also at this MHz. I know I had the latency down to 42ns, but didn't save a screenshot:

[dblooi]

Can people share their results with these sticks?

From what I have heard, they are supposed to be highly binned, D9GMH sticks. I have a pair on the way and would be interested to see in fellow XSers overclocks.

Thanks,

TS from hong kong?
May i know how you get these babies?
Is it you get them from hkepc moderator? XD (nick: amdxp3000+)

I have a pair of 10th as well, able to run 5-5-4-3 126XMHz with 2.6v on my amd rig.



http://valid.x86-secret.com/show_oc.php?id=266568

[sofarfrome]

2.6v...OUCH!!!

[sobih25]

It's too much for them.

[Alex-Ro]

Just for benching it's ok.

[Sadhiq]

The best I've had with one stick of 10th, is 640Mhz benchable CAS5 for 2.45v real. Pretty nice, but Ballistix PC2-8500 old rev do much better