New WR E8500@6206.85MHz

[DMH]

So many volts in PPL not kill the CPU?

Probably he won't need that much PLL,it's just in case it's needed it's there

[Ming@s]

Probably he won't need that much PLL,it's just in case it's needed it's there

It was already seen some see as the die with much less volts in PPL

[Tharshan]

Awesome! What temp do you have on nb?

[The Shooter]

Does the Commando have a NB thermometer?
Well nice pot btw!

[diezel]

WTF 6308.27 mhz it is incredible !!! this cpu is send bij god to you to kick some ass

[lukas69]

Amazing frequency
congratz
impressive 8500

[George_o/c]

Duck-san you are the god of 45nm mhz ... Congats again, for this great milestone
OMG, I'm having a heart attack ...

[franknos90]

congrats duck! you have found the golden one! huge fsb!

excellent work.. 6308mhz

[Data_]

I bet this record will not be beaten in nearest time...

[Tharshan]

you got a nice temp on the CPU there

[LyP0]

nice netburst speeds with core cpu's

simply insane, nice work duck-san

[Monstru]

Once again the master overclocker from Japan amazes us and sets a milestone that will be hard to beat, if that would ever be possible. You have my deepest respect great overclocker, your work is an inspiration to us all.

Out of curiosity.....duck-san....how does you wonderful CPU clocks on air? How much voltage does it need for 4Ghz? I just want to test a theory of mine

[G H Z]

Hey duck, do you ever play with 9650/9770? Like to see what you could do with one of those

[DFI pit bull]

Hey duck, do you ever play with 9650/9770? Like to see what you could do with one of those

I think duck only gets satisfaction getting great results with budget chips not the insanely expensive one's.

[duck]

#255-#289

Can't wait to see 666MHz FSB and 100% overclock on this

baby

Sorry, just wait a little more.

You're joking with us?!

ahahahah
Please can u stop to bench with this ing cpu?!

Stooooop it! This's THE CPU and that Commando is THE MOBO, and you are... i

hate you.

I'm fond of you...hahaha

Duck... you never breake promise.. well done, one more time. now we are waiting

for these 6.33Ghz
and yeah, the cat must be always in foreground

Thanks!
I do my best, but after Computex...
I have a cat sit in the front lines.

benching with a cat nice one! congratz.... that

wouldn't work with my dog.

Thanks! gianni
WRDB becomes cooler.
Thanks a lot!
I saw the pictures and you are a nice guy, too.

Finally 6.3GHz wall is broken , duck-san one little
question how do u control temperature, you are pouring ln2 by hand or u are
using some pressure mechanism?

Thank you very much, Misko-san.
Yes, I do it by hand.

I think is by hand, if not with 2 pots and 1 dewar
it wouldn't be easy

That's right

Impressive!Any plan to broke SPI 1M E850 WR?

Of course I do not forget it.

OMG!! duck-san respekt!! 6.3gigz amazing!

Thank you, illidan-san

Hahahah!new record 6.3G
I hope I can catch your luck,hehehe

Take it not all in the part, hahaha

Can we edit the thread title? Additional 101 Mhz are
worth mentioning.
@duck: Sorry m8, I save my breath for the next big thing you'll manage.

Thank you always, Hyperhorn-san
Please save of your breath a lot.

The key for good result by my experience is temperature
control on CPU, especially if u want to squeeze last mhz on the long run. U
need it to be stable as a rock , pouring skilz is good but it is much better
with low pressure, especially if the pot is fast responsive. My is a
fortunately or not really fast , pour a spoon of ln2 and it can jumps from -
145C to -155 in two-three seconds, very good for cold boot problems very bad
for stable temperature

That's just right! I admire you for it, Misko.
I adjust the point drop by drop after -160C.
And I spend 1 hour 30 minutes on setting of pot.

Gorgeous Day foy you

Fantastic WR and fantastic CPU
Roberto

Thank you, wasky-san

Amazing duck, as always from you. Congrats

I am the gladdest that my temp control is praised.
Thank you!

One word...Great!!

Thank you, gandalfone-san

your coldbug roksx really , y?ou must have fsb
limit, i believe qx with that low coldbug can go up to 6.4g

Thank you, hey
I believe that I can meet you on the next time.

Amazing, congratulations and much respect duck-san.

Thank you! Eldonko
I am very honored.

Congrats With the WR duck-san!
Do you have any coldbug on the NB ?
Becourse we did :-(

Thank you! Nanok
If keep on cool it immediately or cooling it; a cold tapir occurs.
Some coldbug occur if cool it immediately or keep on cooling.
When the system down, I remove pot and when the system works, I use LN2.

Very Impressive clocks.
Congratulations for new WR!
Now we are waiting for 6,5G and then... break netburst by wolfdale

Thank you, Kean-san
OK! I try it....hahaha..

you can try making PLL mod on that commando, 3.0Vpll and
6.5GHz is yours
iirc, Stilt had it done with his commando

Thank you for valuable information!　proxis-san

Awesome! What temp do you have on nb?

I measured it precisely before, but do not measure it recently.
around －50C...

Does the Commando have a NB thermometer?
Well nice pot btw!

Yes, it shows －100C from －50C.

WTF 6308.27 mhz it is incredible !!!
this cpu is send bij god to you to kick some ass

Thank you! diezel-san

Amazing frequency
congratz
impressive 8500

Thank you! lukas69-san

Duck-san you are the god of 45nm mhz ...

Congats again, for this great milestone
OMG, I'm having a heart attack ...

Thank you always ! George o/c
I'm not yet satisfied.
There is yet neither my cpu nor the board at the limit.

congrats duck! you have found the golden one! huge fsb!
excellent work.. 6308mhz

Thank you! franknos90-san

I bet this record will not be beaten in nearest time...

Thank you! Data-san

you got a nice temp on the CPU there

I have trouble with temperature control very much.
But Pentium 4 was more hard.

nice netburst speeds with core cpu's
simply insane, nice work duck-san

Thank you! LyPO-san

Once again the master overclocker from Japan amazes us
and sets a milestone that will be hard to beat, if that would ever be possible.
You have my deepest respect great overclocker, your work is an inspiration to us all.
Out of curiosity.....duck-san....how does you wonderful CPU clocks on air? How
much voltage does it need for 4Ghz? I just want to test a theory of mine

I am very honored.
I will try so hard that I do not disappoint you and all of you.
I show respect for you who can be pleased with the record of others obediently.

Sorry I do not test overclock by air-cooling, so I have no idea.
But, I always do OS's install at 4GHz (1.2v air).

************************************************** ****************************

Hey duck, do you ever play with 9650/9770? Like to see
what you could do with one of those

I think duck only gets satisfaction getting great
results with budget chips not the insanely expensive one's.

I think that all of you already know.
I give a demonstration of LN2 performance at Foxconn booths in Computex 2008
Taipei on June 4 and 5.
It is New Beetle-san(JP), fredyama-san(JP), giorgioprimo-san(Italy), Dimas-san
(Italy) and k|ngp|n-san(US) that play together there.

My planned M/B and CPU ;

M/B: BlackOps(X48), Dreadnough(790i), Destroyer(780a), P45 Avenger(P45)..etc.
CPU: QX9650, E8500, P4-641, Phenom 9850BE..etc.

The try of E8500 and COMMANDO takes a rest in preparation for Computex now.
If Computex is over, I am going to try it again.

Thank you so much LardArse-san & fredyama-san for your kindest invitation to
Computex 2008 in Taipei.

[massman]

Can't wait to see the results of Computex, to be honnest, that's one bunch of talented benchers together ...

[over@locker886]

Impressive work again duck-san!

Good luck you and all guys , who will have Computex! Keep pushing guys!

[G H Z]

Taipei on June 4 and 5.
It is New Beetle-san(JP), fredyama-san(JP), giorgioprimo-san(Italy), Dimas-san
(Italy) and k|ngp|n-san(US) that play together there. [/B]

Can't wait to see the result of this gathering!