Could B3 Phenom be the rebirth of AMD....+1000MHZ OC done!

[merkk1]

Hi
PLA123 The best set-up i could come up with using the Xigmatek power supply is.

Put the 2 PCIe 6pin modular cables into the power supply use them to run the video cards with .
put one SATA modular cable into the plug closest to the out side edge of the case of the power supply. I ran my 2 hard drives off that line .
put one molex modular cable into the plug closest to the out side edge of the case of power supply. I ran my DVD burner and floppy off that line.
Put one modular molex cable into the plug in the middle of the power supply . I ran a floppy plug off that line to power to the mother board 2 4pin flopply plugs per DFI manual .It adds more power to the mother board to help with the stably of the board.

that set-up ran the most stable for me .Now if i use the 2 to PCIe 6+2 line to power the video cards my rig would crash 2 to 3 mins after i log into vista running a 2.81 ghz.

[merkk1]

Pla123
So you know i have RMA my Xigmatek power supply i had up to 30 day and the power supply was not going to be able to run 3 video cards in rig and be able to keep it running stable and that what i got it for in the frist place. It could be the one i got was just a bad
power supply and that your will run your rig troulbe free. I got a PC POWER & COOLING 750w silencer crossfire edition power supply.
It has ran my rig over clock at 2.81 trouble free with no crashing at stock volts so ( about 7 hours run time so far) we how it goses .

[daltona]

Here is my setup, i am running it at 3200Mhz. 16x200mhz. Vcore 1.4v.

http://screenshot-program.com/uplae1...6/Screen_2.jpg

It have been running for 7 hours.

I will do it with orthos too.

[LowRun]

Here is my setup, i am running it at 3200Mhz. 16x200mhz. Vcore 1.4v.

http://screenshot-program.com/uplae1...6/Screen_2.jpg

It have been running for 7 hours.

I will do it with orthos too.

and congrats on the nice OC.

[Nedjo]

Here is my setup, i am running it at 3200Mhz. 16x200mhz. Vcore 1.4v.

http://screenshot-program.com/uplae1...6/Screen_2.jpg

It have been running for 7 hours.

I will do it with orthos too.

cooling?
OS?

[daltona]

cooling?
OS?

Watercooling.
XP Pro.

[Lastviking]

Watercooling.
XP Pro.

Stepping?

[drfedja]

I have done 3.2 Ghz with X3 8750, at box cooling, with ASUS Crosshair 2. The system was pretty stable at vcore ~ 1.34v, but CPU generates a lot of heat.



With Phenom 9550 I was reached 3.05 Ghz, also with box cooling and 1.32v on cheap GA-MA78GM-S2.


With better air cooling, and motherboards these CPU's can reach 3.25-3.3 Ghz.

[vcp-cur]

best thing AMD can do is close down and burn in hell...
they don't deserve any attention, they don't deserve a spot on a forum.

I have AMD, but I now hate AMD so much for releasing only POS cpu's...

I swear if i ever meet hector, i will freaking kick him real hard...

[daltona]

Stepping?

Stepping JAAFB AA 0810BPMW

[AlabamaCajun]

best thing AMD can do is close down and burn in hell...
they don't deserve any attention, they don't deserve a spot on a forum.

I have AMD, but I now hate AMD so much for releasing only POS cpu's...

I swear if i ever meet hector, i will freaking kick him real hard...

Sounds like Hector p***ed in someones corn flakes.

[Nedjo]

best thing AMD can do is close down and burn in hell...
they don't deserve any attention, they don't deserve a spot on a forum.

I have AMD, but I now hate AMD so much for releasing only POS cpu's...

I swear if i ever meet hector, i will freaking kick him real hard...

??? skipped daily dose of medication ???

[stocius]

Sounds like Hector p***ed in someones corn flakes.

LOL, yeah that's about it.

[Rammsteiner]

best thing AMD can do is close down and burn in hell...
they don't deserve any attention, they don't deserve a spot on a forum.

I have AMD, but I now hate AMD so much for releasing only POS cpu's...

I swear if i ever meet hector, i will freaking kick him real hard...

I could not agree more with such unargumented posts

[biohead]

best thing AMD can do is close down and burn in hell...
they don't deserve any attention, they don't deserve a spot on a forum.

I have AMD, but I now hate AMD so much for releasing only POS cpu's...

I swear if i ever meet hector, i will freaking kick him real hard...

Ah, all emotional over some products are we now. I don't think you're going to find Hector if you keep living in the mall like that.

[Eson]

best thing AMD can do is close down and burn in hell...
they don't deserve any attention, they don't deserve a spot on a forum.

I have AMD, but I now hate AMD so much for releasing only POS cpu's...

I swear if i ever meet hector, i will freaking kick him real hard...

Now ive lost faith in humanity. Sigh.

[SocketMan]

best thing AMD can do is close down and burn in hell...
they don't deserve any attention, they don't deserve a spot on a forum.

I have AMD, but I now hate AMD so much for releasing only POS cpu's...

I swear if i ever meet hector, i will freaking kick him real hard...

How long have you looked at Brothers Acid signature for?
I did think there was a secret message in it, maybe you got the wrong one?

[QuietIce]

Here is my setup, i am running it at 3200Mhz. 16x200mhz. Vcore 1.4v.

http://screenshot-program.com/uplae1...6/Screen_2.jpg

It have been running for 7 hours.

I will do it with orthos too.

That's a great OC!!!


I trust BOINC as much or maybe more than P95/Orthos for OC'ing results but I use SETI instead of Einstein (but I also crunch Einstein!). The nice thing about SETI is all the work units are crunched by two different computers so the work is actually validated. I used to think any WU would error before reporting as good but results on my (only) Intel proved that to be a false assumption. It happily continued to return faulty work units for a couple of days before I caught the problem, but no locks-ups, hiccups, or anything else to show there was something wrong. SuperPi and P95 both ran just fine even though the system obviously wasn't stable ...

[emlyn_dewar]

best thing AMD can do is close down and burn in hell...
they don't deserve any attention, they don't deserve a spot on a forum.

I have AMD, but I now hate AMD so much for releasing only POS cpu's...

I swear if i ever meet hector, i will freaking kick him real hard...

754 Sempron 3000 user tbh, should have opted for something a little newer.

[Calcifer]

watch what u say there emlyn those 754 sempron 3000+ are solid chips well it overclocks nicly on my old 754 system.

[wiak]

new bios from gigabyte, it says it supports 9950 is added but all know something else might be fixed or improved that isnt in the release notes

GA-MA790FX-DQ6
F5 2008/05/21
1. Update CPU ID (Support AM2+ Phenom 9950 CPU)
http://www.gigabyte.com.tw/Support/M...S&FileID=13567

GA-MA790FX-DS5
F6 2008/05/21
1. Update CPU ID (Support AM2+ Phenom 9950 CPU)
http://www.gigabyte.com.tw/Support/M...S&FileID=13568

[emlyn_dewar]

watch what u say there emlyn those 754 sempron 3000+ are solid chips well it overclocks nicly on my old 754 system.

lol, true they overclock very nicely, with 128k L2 though... *shudders*

The perfect CPU for Supreme Commander tbh... *cough*

[Calcifer]

anything is perfect for supcom pending how you play it. teams nicly with my agp 9550

[Particle]

You must play small supcom battles. On the normal to large size maps with a few AI players, things really start bogging down.

---

I just received a week 11 9850 for a friend's machine and I've noticed something. No messed up corners! It looks like they took a fine grinder all around the edge on the heat spreader.

[Rammsteiner]

I just received a week 11 9850 for a friend's machine and I've noticed something. No messed up corners! It looks like they took a fine grinder all around the edge on the heat spreader.

Although I didnt have lot of problems with the current grinding on Phenoms, good to know and thx for letting us know! Better grinding is of course always better.

Any possibility you could make a photo of it? Or is it already too late? If so, did only the edges get a better grinding or did the whole IHS look 'better' too?

Im happy I waited with buying another Phenom. The longer I wait, the better OC results I see on the net. And this news is only better