Water Cooled Case Gallery

[BigJoe]

My mess

[kiparosu]

My mess

1500W OMG!!!

[rafwlkp]

On his cfg PSU should working passive ^^

[Andreoid]

790i pwm blocks...

more pictures in my signature

[BigJoe]

On his cfg PSU should working passive ^^

It would be nice, but this PSU is little noisy...

[weeriemand]

Well I'm a bit new to XS so you guys will probably have some tips for me on how to improve my cooling.
Here's a few pictures.

[SoulsCollective]

Argh Thermaltake! My friend, in all seriousness, I recommend you upgrade to air-cooling. Thermaltake make shoddy watercooling kits.

Scrap it entirely and start over.

[weeriemand]

Argh Thermaltake! My friend, in all seriousness, I recommend you upgrade to air-cooling. Thermaltake make shoddy watercooling kits.

Scrap it entirely and start over.

It's just the CPU block wich is Thermaltake.
I modded a Thermaltake Tribe set, put in 2x 120mm radiators and an Eheim 1048 pum instead of the stock thing. Also added the RAM cooling.

But is it really that bad?

[yarden]

It's just the CPU block wich is Thermaltake.
I modded a Thermaltake Tribe set, put in 2x 120mm radiators and an Eheim 1048 pum instead of the stock thing. Also added the RAM cooling.

But is it really that bad?

i dont know if its just me or are you graphic cards extremely bent???

[adidassler]

Checkout my Friend's Watercooled Rig from the Phillipines (junkun13 also known as Bugkalot of XS)

He's the newest addition to the world's most beautiful computer systems: MDPC

http://www.million-dollar-pc.com/sys...s-junkun13.htm

[Ming@s]

Very Good Case.

[matt100]

Hehe, i did before this mod :P

I dont really use the thing anyway so it doesnt matter. I hoped it would fit with the extra rad and the DVD player but thats just not the case.

When i need it i'll just install it for a while on my desk and remove it when done with it.

yay!! another person who wants watercooling over optical drives I connect my old sata dvdrw via esata when I need it now, which is hardly ever! Nice build

[MayDay84]

Did a little upgrade to my chaos rig. Changed to pump to Laing DDC, reservoir to a tractor brake fluid tank and added the Black Ice 120mm radiator to front of case attached to Scythe Kama Bay..Yea, and GPU got AC Accelero S1 with 80mm cooler standing on screw legs under it (120mm coming soon..) Here's how it used to look like before:
http://i97.photobucket.com/albums/l2...e/d4ea5d75.jpg

And here's the situation now:

[l33t p1mp]

Before tline and before I cleaned up the mess. Notice the stock intel cooling fan blowing right onto the northbridge. Also 120 mm case fan with blue LED's blowing right onto mah ramz.



Some more.

[xpatar]

Before tline and before I cleaned up the mess. Notice the stock intel cooling fan blowing right onto the northbridge. Also 120 mm case fan with blue LED's blowing right onto mah ramz.



Some more.

From a positive point of view why do you give directly water from the pump to the waterblock?
Pump also produces heat.
I think you'd better change your loop to:
Reservoir-pump-radiator-waterblock-reservoir.

[wra1th]

Here is my system.




Unfortunately I haven't finished it yet...

[TedShred]

I always enjoy browsing this thread

@ MayDay84: a part from a tractor?! love it! And are those plain ol' copper plumbing elbows?

[MayDay84]

I always enjoy browsing this thread

@ MayDay84: a part from a tractor?! love it! And are those plain ol' copper plumbing elbows?

Yea, I work in a tractor plant and yes they are the legendary plumb elbows Did a little upgrade to my rig just now changing the rear rad before the cpu block in the loop and added some blue car engine coolant:


Just cursing here the block 'cos it sucks!! It's Zalman WB4-Gold..It doesn't move the heat well enough to water because my cpu (3.2GHz) is idle over 50c now and the water is about 30c degrees..The cpu HS is straightened so the contact should be fine..

[nullface]

That is a reatarded use of elbows, you use them where there is no use for them.

Pure flow killer.

Love the install of the fan below the GFX thoug

[Ming@s]

Here is my system.




Unfortunately I haven't finished it yet...

Great Job.

[wra1th]

Great Job.

Thanks
Later I'll install water blocks on MB and on graphic cards (when new ATI's 4870 will come)

PS it's my 10th post here...

[l33t p1mp]

From a positive point of view why do you give directly water from the pump to the waterblock?
Pump also produces heat.
I think you'd better change your loop to:
Reservoir-pump-radiator-waterblock-reservoir.

Aw, I wish someone told me that before I set up my tline. Thanks for the info though. If I ever take the loop appart again I will be sure to put it in that order. No idea why I put it that way though. I had nobody to help me so I just followed the instructions in the manual lolz.

[coolfris]

From a positive point of view why do you give directly water from the pump to the waterblock?
Pump also produces heat.
I think you'd better change your loop to:
Reservoir-pump-radiator-waterblock-reservoir.

Aw, I wish someone told me that before I set up my tline. Thanks for the info though. If I ever take the loop appart again I will be sure to put it in that order. No idea why I put it that way though. I had nobody to help me so I just followed the instructions in the manual lolz.

Myth: The order of components has a significant impact on temps (eg, the radiator must be before the CPU).

"Watercooling Myths Exposed"

And if you are interested, there's more here:


"Common Cooling Misconceptions"

So no need or reason to change everything.

[l33t p1mp]

Sweet. Makes me feel a lot better lol. Thanks for the links, too.

[MayDay84]

That is a reatarded use of elbows, you use them where there is no use for them.

Pure flow killer.

Love the install of the fan below the GFX thoug

Yes but those round elbows aren't as bad as straight 90degree corner elbows.. But the crappy block here is my worst worry now..