Which is not allot right now!!

Just trying with SLI memory set @ EXPERT.

I just keep hitting a "wall" @ 2 3/4 hrs prime. Whatever setting I have tried so far won't let me get passed it. If the sli ready memory setting doesn't help, I'll try raising and lowering each setting by a notch again in case I missed something.

I think I can rule out the memory holding me back since it passed a full round of memtest without error. Does that mean I can take NB core and Vdimm out of the equation?

Here's my current configuration anyway:

Asus Striker II Formula

Q9450
L810A727
SLAWR
??/0?/08

Linked 1:1
FSB/DRAM in Sync
Mutiplier 8
FSB 458.25
PCIE 100
DRAM 920
DRAM Timing Control AUTO

Spread spectrums Disabled

Loadline Calibration Disabled

SLI memory EXPERT

CPU Voltage 1.437
PLL Voltage 1.60
DRAM 2.10
FSB Termination Voltage (VTT) 1.34
North Bridge Voltage 1.30
South Bridge Voltage AUTO (bios shows 1.50-52v)
GTL ref CPU AUTO
GTL ref NB AUTO
ref DDRII Controller AUTO
ref DDRII Controller Channel A AUTO
ref DDRII Controller Channel B AUTO