Crucial Ballistix 8000C5 EPP oc...

[Roger_D25]

Greet news T07N, glad to hear your happy! Heck 600Mhz isn't all that bad, lol! Although it may run Orthos for a few hours with no problems I've occationally had errors after multiple hours of Orthos. It might be a good idea to run Orthos overnight to make sure things are stable (try to run more than 8hrs if possible). Alot of people have different ideas of what "stable" really is, some think being able to run SuperPI's 1M test means their system is stable and others like myself like to run many hours of Orthos/Dual Prime before rig is stable?

[runmc]

Not braggin and I'm sure not complaining. Well maybe I'm complaining because I didn't buy to sets.

[Roger_D25]

What are you running for a board runmc? I ask because I've been looking for a version of "clockgen" to work with 680i but I've had no luck? With that said, 1260Mhz isn't too bad! What are you running for voltage to these modules?

[runmc]

What are you running for a board runmc? I ask because I've been looking for a version of "clockgen" to work with 680i but I've had no luck? With that said, 1260Mhz isn't too bad! What are you running for voltage to these modules?

I picked up a P5B DEL today - 2.4v on the DDR2 These sticks ran terrible on my P5W DH DEL - two completely different animals.

[Roger_D25]

Thanks runmc, much apprecaited! I've been seriously considering making the switch over to the P5B-Deluxe (Plus) if/when it becomes available in our country? At the very least I'd like to try the P5B-Deluxe out for a bit to see how it runs compared to the 680i? Besides running your modules well what's your initial impression?

[runmc]

Thanks runmc, much apprecaited! I've been seriously considering making the switch over to the P5B-Deluxe (Plus) if/when it becomes available in our country? At the very least I'd like to try the P5B-Deluxe out for a bit to see how it runs compared to the 680i? Besides running your modules well what's your initial impression?

I like the board alot so far. I wish I had gotten it sooner. Your avatar says New Hampshire. I don't get it

edit - I just saw the (PLUS)

[T07N]

Yeah the p5b dlx is good if you know how to configure it =).

[Gautam]

I picked up a P5B DEL today - 2.4v on the DDR2 These sticks ran terrible on my P5W DH DEL - two completely different animals.

Good to see the rams' clocking well either way.

[syne_24]

So i have this pair here for a few weeks with my P5W and I knew it was the board holding me back. Anyways got a chance to play with the abit 680i and Commando. It didnt do so well on the 680i due to abit's buggy bios. However, the Commando really was a different story.

600 @ 4-4-4-12 w/ 2.4v



500 @ 3-4-3-4 w/ 2.35v



Overall I'm really satisfied with this ram. Newegg slipped up big time

[Quentin]

500 Cas 3 à 2.3v

do you have set cas 3 under windows ?

[Flexkill]

I have this Crucial Ballistix PC8000 in my new rig here . This is on a P5W DH Deluxe(1901 BIOS) What dou you guys think of this OC?

Crucial/P5W DH Screenie

[gr8golf]

Not braggin and I'm sure not complaining. Well maybe I'm complaining because I didn't buy to sets.

I am going to list my set of Ballistix for sale in the next couple of days. I wanted to go to 4GB and I got in on the Buffalo Firestix deal so my Ballistix will be on the market.

[Flexkill]

well i am stopping here for the night.....hope she's got more in her tomorrow!


http://premium1.uploadit.org/flexkill//32M3.8.JPG

[rithina]

Hi guys, i just rma my ballistix (new HS) and they got me back an old HS which does not have EPP label on it.. anyone know if the older one is EPP? Both are PC2-8000 CL5 Ballistix.. i wonder if these old stick are fat boy since they are the earlier revision..

[angelicavoc]

wow...very2 excelen....nice.....
good ram n good ocers..

[nut311]

wow...very2 excelen....nice.....
good ram n good ocers..

show me your ballistix buddy

[Harshal]

This is what I did since my good friend benny started a 4-4-4-XX thread @ my home forum

Motherboard: DFI LP DK X48-T2RS
Processor: E8400
Memory: Crucial Balllistix PC8000 [EPP 2.2V] @ 2.7 volts
http://valid.x86-secret.com/show_oc.php?id=369814

KIT is 1.5 yr old and have been doing duty in my home rig. Clocking 4-4-4-XX is diff for sure

EDIT:
Some CL3-3-3-XX action
Motherboard: DFI LP DK X48-T2RS
Processor: E8400
Memory: Crucial Balllistix PC8000 [2.2V Stock] @ 498MHz with 2.9V
http://valid.x86-secret.com/show_oc.php?id=371090

Motherboard: DFI LP DK X48-T2RS
Processor: E8400
Memory: Crucial Balllistix PC8000 [2.2V Stock] @ 512Mhz with 2.95V
http://valid.x86-secret.com/show_oc.php?id=371093