very nice case and cooling guys,here's mine
very nice case and cooling guys,here's mine
Intel C2Duo E6550 + Thermalright Ultra120A
Adata Vitesta 2x1GB DDR2-800 + Asus P5K-E WifiAP
Powercolor X1950Pro 512mb 256bit GDDR3
Acbel Intelligent 450W + Seagate Barracuda 250GB
Razer DeathAdder + Dell Multimedia + Koss KSC75
i'll be showing off my rig in the next few days. case is undergoing some modding though
sneak preview here:
http://www.xtremesystems.org/forums/...d.php?t=186919
"Never under estimate the predictability of stupidity"
=======
Q6600 @ 3.6 / TRUE (both lapped)
P5Q Deluxe
4Gb Corsair DominatRIX 1066Mhz
1Gb HD 4870 + HR03-GT
2 x 320gb WD3200AAKS RAID-0
Thermaltake Toughpower 850
X-Fi Fatality / SR-71 Amp > Sennheiser HD650's & Logitech Z-5500
HP W2207 TFT
and me??? Powered by absolut, kebabs, tramadol & a new liver
I'd upp pics of my rig if i had a digital camera, i might snoop for an uber cheap model to show y'all i ain't spoofing about my rig!
Gigabyte EP45-DQ6 - rev 1.0, F13a bios | Intel Q9450 Yorkfield 413x8=3.3GHz | OCZ ProXStream 1000W PSU | Azuen X-Fi Prelude 64MB X-RAM| WD VelociRaptor 74HLFS-01G6U0 16MB cache 74GB - 2 drive RAID 0 64k stripe | ASUS 9800GT Ultimate 512MB RAM (128 SP!!) | G.SKILL PC2-8800 4GB kit @ 1100MHz | OCZ ATV Turbo 4GB USB flash | Scythe Ninja Copper + Scythe 120mm fan | BenQ M2400HD 24" 16:9 LCD | Plextor 716SA 0308; firmware 1.11 | Microsoft Wireless Entertainment Desktop 8000 | Netgear RangeMax DG834PN 108mbps; firmware 1.03.39 + HAWKING HWUG1 108mbps USB dongle | Digital Doc 5+ | 7 CoolerMaster 80mm blue LED fans | Aopen H700A tower case | Vista Home Premium - 32bit, SP1
sweet jesus Tommy. do you have some connection with someone at Thermalright or something? i envy your collection.
- Silverstone FT-01B
- Corsair HX620
- DFI LanParty DK 790FX-M2RS
- AMD X2 6400+ BE w/ Thermalright Ultima 90 @ 3.2
- 2 x 1 GB G.Skill DDR800(4-4-4-12)
- 2 x 1 GB Corsair XMS2 Dominator(4-4-4-12)
- BFG Tech 9800GTX(stock cooling for now)
- 2 - 250GB Seagate SATA
My 9600GT with custom hr-03 .I bended the heatpipes last night because my case was getting to crowded
After mounting the hr-03 temperatures dropped from 50 to 34 in idle and from 68 to 42 in full load
Last edited by alexey; 05-09-2008 at 01:24 PM.
thats a pretty good idea for the HR03 but does the fan have a hole on the side of the case to pull air from? or do you run it without the side of the case on?
- Silverstone FT-01B
- Corsair HX620
- DFI LanParty DK 790FX-M2RS
- AMD X2 6400+ BE w/ Thermalright Ultima 90 @ 3.2
- 2 x 1 GB G.Skill DDR800(4-4-4-12)
- 2 x 1 GB Corsair XMS2 Dominator(4-4-4-12)
- BFG Tech 9800GTX(stock cooling for now)
- 2 - 250GB Seagate SATA
Here is your answer
Actually i thought of this mod because i am thinking of buying a 3870X2 and i want to use a dual hr-03 configuration
Last edited by alexey; 05-09-2008 at 01:17 PM.
well there you have it...like the looks of that.
- Silverstone FT-01B
- Corsair HX620
- DFI LanParty DK 790FX-M2RS
- AMD X2 6400+ BE w/ Thermalright Ultima 90 @ 3.2
- 2 x 1 GB G.Skill DDR800(4-4-4-12)
- 2 x 1 GB Corsair XMS2 Dominator(4-4-4-12)
- BFG Tech 9800GTX(stock cooling for now)
- 2 - 250GB Seagate SATA
I dont really like the idea of bending heatpipes but that actually looks good. I should buy a HR-03 GT for my 9800GTX...
[i5 2500K, ASrock extreme3 gen3, Corsair Vengeance LP 8GB 1600MHz, Palit GTX570 Sonic Platinum, CM HAF932, Antec Truepower New 650w]
Thx guys!!! I have to say that i was super careful not to break the heatpipes while bending them.When bending a heatpipe u have to be careful not to apply pressure in a single spot.I placed the heatpipes on a round surface and moved them on it while applying pressure
@Tommy: how did you mount that HR05 on the NB?
On the first pic here you can see the mounting quite well
more great looking pics tommy.
- Silverstone FT-01B
- Corsair HX620
- DFI LanParty DK 790FX-M2RS
- AMD X2 6400+ BE w/ Thermalright Ultima 90 @ 3.2
- 2 x 1 GB G.Skill DDR800(4-4-4-12)
- 2 x 1 GB Corsair XMS2 Dominator(4-4-4-12)
- BFG Tech 9800GTX(stock cooling for now)
- 2 - 250GB Seagate SATA
thanks Tommy! didn't know you could take out that part of the sink in the NB....now i knowOriginally Posted by Tommy_Hewitt
On the first pic here you can see the mounting quite well
It still amazes me how your photos come out like renders, they are perfect.
Awsomeeee shots people
· Asus P5E Mobo
· Intel Core 2 Duo E6600 Clocking @ 3.05GHz (335 x 9 multiplier, 1.43V) 1600FSB
· GeIL 4GB PC6400C4 Memory @ 835MHz
· XFX 512MB 8800GTS ~ (Core Speed: 780MHz, Memory Speed: 2080MHz, Shader Clock: 1950MHz)
· X-Fi Xtreme Audio 7.1 Sound
· Samsung F1 1TB HDD
· SpinPoint T 320GB HDD
· CoolerMaster RealPower M 700w
· Windows 7 Enterprise 64bit, Service Pack 1
EXTREME-SHOWCASE.com
Nice shots. You said you have two cameras, were these taken with the Fujifilm 6500fd? I have the same camera and I'd like to be reassured that I can achieve a similar result before I start trying in vain.
And alexey, well done for having the nuts to bend your H3-03.
Tommy, those are awesome pictures
what model dfi board is that one? is it the ddr3 version?
i'm going to put the order in looks sexy
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
Jep, all pics with black background are taken with the fuji
Edit: Also taken with the fuji
Last edited by Tommy_Hewitt; 05-11-2008 at 12:33 AM.
^ interesting cooler. who makes it?
- Silverstone FT-01B
- Corsair HX620
- DFI LanParty DK 790FX-M2RS
- AMD X2 6400+ BE w/ Thermalright Ultima 90 @ 3.2
- 2 x 1 GB G.Skill DDR800(4-4-4-12)
- 2 x 1 GB Corsair XMS2 Dominator(4-4-4-12)
- BFG Tech 9800GTX(stock cooling for now)
- 2 - 250GB Seagate SATA
What fan is that, with the blue LED and the orange UV frame ?
http://mod-pc.com/modules.php?name=T...=vart&ref=Y558
Reply With Quote
Bookmarks