Can someone explain to me why a QX9770 cpu at a stock FSB of 1600 works fine but not with any other cpu like the QX9650 at a 1600 FSB?
Can someone explain to me why a QX9770 cpu at a stock FSB of 1600 works fine but not with any other cpu like the QX9650 at a 1600 FSB?
CPU: Intel Core i7-4770K 4.8GHz
MOBO: GIGABYTE GA-G1.Sniper M5 MATX 1150
MEMORY: G.SKILL Trident X 8GB 2400MHz 9-11-11-31 1T
GPU: 2 x eVGA GTX 780 SC
SOUND KRK Rokit 5 Limited Edition White Studio Monitors
SSD: 4 x Samsung 128GB Pro's Raid 0
PSU: SeaSonic Platinum 1000W
COOLING: 2 x Alphacool NexXxoS UT60 Full Copper 420mm 6 x Swiftech Helix 140mm Fans
CASE: Lian Li PC-C32B TECH STATION MOD build log coming soon
MONITOR: ASUS VG278HE Black 27" 149Hz
O.S: Windows 7 Pro x64
No idea, I have just moved from a QX9650 to a QX9770 and had exactly the same experience. Weird!Originally Posted by Lu(ky
Regards
Tyke
___________
CPU: QX9770 @ 4.05GHz (9 X 450MHz) MB: Striker II Extreme Bios 1104 OS: VISTA ULTIMATE SP1 X64
GRAPHICS: 3 X Zotac GTX 280 Amp! SLi Watercooled @ 740/1500/1400 MONITOR: 30" NEC MultiSync LCD3090WQXi
SOUND: Creative Titanium Fatality PCI-E STORAGE: 2X 300GB VelociRaptor Raid 0, Hitachi Deskstar 7K100 750GB
MEMORY: 2 x 2GB Corsair 1600MHz DDR3 @ 1800MHz 8-7-6-18 2T P1 & P2 Enabled POWER: PC Power & Cooling Turbo Cool 1200W
Single 1/2" loop watercooling on CPU and S2E : Swiftech Laing D5 Vario MCP655, DTek Fuzion V2 with Quad Core plate, EK Blocks on NB and Mosfets, Evercool VGA Cooler on SB, TFC Exchanger Triple Rad with shrouds & 3X Yate Loon D12SH-12.
Single 1/2" loop watercooling on Graphics : DD Tieton Water Blocks with Copper Ram Plates, DLaing DDC-1Plus 18W Ultra with OCLabs Plexi Top, TFC Exchanger Quad Rad with shrouds & 4X Scythe S-FLEX 1600RPM.
BIOS: VCore=1.375 NB=1.55 SB=1.60 VTT/PLL=AUTO Memory=1.90 LOAD TEMPS: CPU 60ºC, NB 45ºC, SB 42ºC, GPU 58ºC.
This is exactly what I posted earlier, very interesting? When I used my E8400 FSB1600Mhz was no good but with the QX9770 (with native FSB1600Mhz support) works just fine with both unlinked and linked/synced!
Asus Maximus III Formula (2001)
Intel i7 860 (L924B516)
Noctua D14
Corsairs CMG4GX3M2A2000C2 (2 x 2GB) RAM
eVGA GTX480
DD-H20
BIX GTX360
MCP35X PWM
Creative X-Fi Titanium PCI-e
LG GGC-H20L Blu-Ray
Toughpower 850w Modular
GSkill Phoenix Pro SSD 120GB
HEAT
When I set a 475FSB I cannot set the memory any higher even unlinked. If I put in 2000MHz it just defaults to 1900MHz. I can get the board to boot at 500FSB, but it freezes starting windows, whatever memory speed I set, linked or unlinked.
Regards
Tyke
___________
CPU: QX9770 @ 4.05GHz (9 X 450MHz) MB: Striker II Extreme Bios 1104 OS: VISTA ULTIMATE SP1 X64
GRAPHICS: 3 X Zotac GTX 280 Amp! SLi Watercooled @ 740/1500/1400 MONITOR: 30" NEC MultiSync LCD3090WQXi
SOUND: Creative Titanium Fatality PCI-E STORAGE: 2X 300GB VelociRaptor Raid 0, Hitachi Deskstar 7K100 750GB
MEMORY: 2 x 2GB Corsair 1600MHz DDR3 @ 1800MHz 8-7-6-18 2T P1 & P2 Enabled POWER: PC Power & Cooling Turbo Cool 1200W
Single 1/2" loop watercooling on CPU and S2E : Swiftech Laing D5 Vario MCP655, DTek Fuzion V2 with Quad Core plate, EK Blocks on NB and Mosfets, Evercool VGA Cooler on SB, TFC Exchanger Triple Rad with shrouds & 3X Yate Loon D12SH-12.
Single 1/2" loop watercooling on Graphics : DD Tieton Water Blocks with Copper Ram Plates, DLaing DDC-1Plus 18W Ultra with OCLabs Plexi Top, TFC Exchanger Quad Rad with shrouds & 4X Scythe S-FLEX 1600RPM.
BIOS: VCore=1.375 NB=1.55 SB=1.60 VTT/PLL=AUTO Memory=1.90 LOAD TEMPS: CPU 60ºC, NB 45ºC, SB 42ºC, GPU 58ºC.
Posting Permissions
Reply With Quote
Bookmarks