Water Cooled Case Gallery

[Kilyin]

It is sprayed with spray cans. And yes, that is 1/2"ID 3/4"OD tubing.
You did see the link to the other 2 pictures(better) in my post?

Curious how you mounted the pump like that. Did you just remove the metal bracket stand and attach it at a different angle?

[bundymania]

@Janno: It´s a selfmade 5mm plexi plate with a 3mm hole for a Led in it. i also made ventilation holes in the middle. i bought the spikes from this ebay seller:

Dark Style Accessoires

here´s another one, that i made for a user:

[Concept 5000-FX]

Hey PC-DUDE I Like That !!!

[CraptacularOne]

Did a little more cable management to tidy up a few cables I was unhappy with:

[Waterlogged]

bundy, I really liked the red much better. You had the whole thing really fine tuned, it's JMO but, you de-tuned your rig a bit.

[Rob_B]

Curious how you mounted the pump like that. Did you just remove the metal bracket stand and attach it at a different angle?

I took it of the stand and mounted it on the out side of one of the legs.
Than I bend it over. I ziptied it to the other leg for some extra support (not really needed)
The screws on the outside are not used, just put them there so I don't lose them.

[the monk]

Did a little more cable management to tidy up a few cables I was unhappy with:

very, very clean craptacular......real nice.......awesome job. peace, randy.

[Rob_B]

...some color Variations [/IMG]

That looks great

Did a little more cable management to tidy up a few cables I was unhappy with

Nice setup. I like that green color. Is that colored tubing or coolant?

[The0men]

Looks like clear tubing to me.

Nice rig though, awsome cable management.

I can never be bothered much with that sort of thing.

when I do bother with tidying up, I just move the mess
to behind the motherboard tray.

[elpibe10]

Neat looking rig !

Impeccable cable management

[bundymania]

@Waterlogged: Dude, the red/white thing was nice, but..ya know....i got this setup for over 1 year, so its time for some new HW and colors (HW Update with dfi board soon, when mips send me the waterblocks) and btw: the main theme was copied too often from many users in my home forum until now (i got more than 50 pn´s about the water mixture )

[Utnorris]

the estimator does not have the stuff i have ( Eheim 1250, MCW-30, MCW-60 and one eleven's Block )
as for the rad's i have one dual but if i decide to go for the triple the dual will be used in one other system so there is not much to lose .
if we had only one question.
only for the cooling performance
2 duals Vs 1 triple
and let's forget the power of the pump, the flow restrictive and everything else what the answer would be ?

two duals performs better than one triple or vice versa ?

There is an older estimator that I have attached that should have your stuff. As far as you question, here is the response from Alex Venz gave me when I asked pretty much the same thing.

"People have had mixed results with that approach... Putting two radiators into a system can improve performance beyond that of a single 3-fan radiator, provided that the added pressure drop (and, thus, lower coolant flowrate) doesn't negate the performance gain from the added surface area. Since you're using a DDC-3.1, I think that the flowrate difference would be pretty minimal so, if you have room, a second double fan radiator may be a better solution.
Best regards,

Alex Venz

Co-Owner, Petra'sTech/Petra's Tech Shop"

They though a lot more about this than I do. I hope this helps.

Utnorris

[Utnorris]

CraptacularOne, looks really good, I'm jealous. And Bundymania, love the orange look, I am big Tennessee fan, so the orange coloring is definitely a plus in my book. Love this thread,

Utnorris

[CraptacularOne]

Thanks for the kind words guys took a good while to finally get all the cables hidden the way I wanted them. The tubing is clear, it's the coolant additive that is gives it it's green color. It's also UV reactive so I'm planning on also putting a UV light on the bottom to really make the green tubes jump out.

[peebee]

New cam, new pic

LEDs installed finally.

[disruptfam]

nice!!! what cam?

[peebee]

Canon EOS 350D (DSLR)
My dad went to buy the new 450D so I got his old cam 350D

[smee]

Canon EOS 350D (DSLR)
My dad went to buy the new 450D so I got his old cam 350D

Haha, NICE!! Your so lucky... I can't wait till my dad upgrades from his Canon 5D...

[peebee]

Well, I didn´t get it as a present though. Christmas in advance or how can I say?

[rangerone7669]

i got my uv lights put in now. the wire management could be better but it was all i could do without a bunch more mobo tray cutting. maybe in the future i'll fix it up, but for now i'm very pleased with the results.


By rangerone7669, shot with Photosmart M415 at 2008-05-08

[DarthBeavis]

@Janno: It´s a selfmade 5mm plexi plate with a 3mm hole for a Led in it. i also made ventilation holes in the middle. i bought the spikes from this ebay seller:

Dark Style Accessoires

here´s another one, that i made for a user:

That would take 10 minutes with Corel Draw/CAD/ and a laser cutter Nice job by hand tho

laser is teh bomb:


Dude I cannot image the havok you would subject the world to if you have this type of equipment and your design skills

[bundymania]

via dremel is more fun...lasercut need no skills

i know some local companies, where i can made lasercuts for $$$, but its not "real" modding in my opinion - handmade rocks

[madmaxx]

^^thats awesome dude!!

[Utnorris]

Gee, wish I had a laser cutter just laying around, .

utnorris

[Duniek]

via dremel is more fun...lasercut need no skills

i know some local companies, where i can made lasercuts for $$$, but its not "real" modding in my opinion - handmade rocks

handmade rocks but laser rocks too