ABit AX78 Overclocking/Stability

[justapost]

;===========================================================
;	W83627EHF Index and Internal Pin Define
;===========================================================
;	Pin name			Index	Bank		
;	---------			----	----
;	"VCORE"			0x20	0
;	"VIN0"			0x21	0
;	"VAVCC"			0x22	0
;	"V3VCC"			0x23	0
;	"VIN1"			0x24	0
;	"VIN2"			0x25	0
;   	"VIN3"			0x26	0
;	"VSB"			        0x50	5
;	"VBAT"			0x51	5
;	"VIN4"			0x52	5
;	"CPUTIN"			0x50	1
;	"AUXTIN"		        0x50	2
;	"SYSTIN"		        0x27	0
;	"SYSFANIN"		      0x28	0
;	"CPUFANIN0"		0x29	0
;	"AUXFANIN0"		0x2A	0
;	"CPUFANIN1"		0x3F	0
;	"AUXFANIN1"		0x53	5
===========================================================

Thank you for the effort KTE.

So ABit AX78 uses the W83627EHF sensor chip. This table seems to be the label mapping for this chip.
I'd need a list of detected chips from the SMBus interface. I explained it as far as i could over at the Unified DFI thread.

I wonder if the freezing might also occure if one of those better clockers run with a too high voltage for them.