ASUS P5K Deluxe - Intel P35 Bearlake + E6600 B1 / Q6600 B3

[rip[tor]

Running Bios v0812, and everytime i shut down for a min or 2, it tells me Overclocking failed even at stock settings with minute changes, could someone tell me what i need to do ?

E6750 (liquid cooled)
8800gt
ReaperX PC8000 2x2gb (black slots) set at 2.2 volts.
620HX
Samsung t1 f1

JumperFree Configuration Settings
AI Overclocking: Manual
CPU Ratio Control:Auto
FSB Frequency: Auto
PCI-E Frequency: 100
Dram Command Rate [N2]
DRAM Frequency: Auto
DRAM Timing Control: Manual
CAS# Latency: 5
RAS# to CAS# Delay: 5
RAS# Precharge: 5
RAS# Activate to Precharge: 18
TWR: Auto
TRFC: Auto
TWTR: Auto
TRRD: Auto
TRTP: Auto
DRAM Static Read Control: Disabled

Transaction Booster: Auto

CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled

CPU Voltage: [1.4000v]
CPU Voltage Reference: Auto
CPU Voltage Damper: Auto
CPU PLL Voltage: Auto
DRAM Voltage: 2.20
FSB Termination Voltage: Auto
North Bridge Voltage: Auto
North Bridge Voltage Reference: AUTO
South Bridge Voltage: AUTO
clock Over charging voltage: Auto
Load Line Calibration [Enabled]

Advance CPU Settings
CPU Ratio Control:Auto
C1E Suppport: Disabled
Max CPUID Value Limit: Disabled
Vanderpool Technology: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled

[Leeghoofd]

Running Bios v0812, and everytime i shut down for a min or 2, it tells me Overclocking failed even at stock settings with minute changes, could someone tell me what i need to do ?

E6750 (liquid cooled)
8800gt
ReaperX PC8000 2x2gb (black slots) set at 2.2 volts.
620HX
Samsung t1 f1

[B][COLOR="Red"]JumperFree Configuration Settings
AI Overclocking: Manual
CPU Ratio Control:Auto --> try 7 first then 8x later on
FSB Frequency: Auto --> 400
PCI-E Frequency: 100
Dram Command Rate [N2]
DRAM Frequency: Auto --> 1002
DRAM Timing Control: Manual
CAS# Latency: 5
RAS# to CAS# Delay: 5
RAS# Precharge: 5
RAS# Activate to Precharge: 18
TWR: Auto
TRFC: Auto --> 55
TWTR: Auto
TRRD: Auto
TRTP: Auto
DRAM Static Read Control: Disabled

Transaction Booster: Auto --> Disabled
relax level 0

CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled

CPU Voltage: [1.4000v]
CPU Voltage Reference: Auto
CPU Voltage Damper: Auto
CPU PLL Voltage: 1.5
DRAM Voltage: 2.0
FSB Termination Voltage: 1.3
North Bridge Voltage: 1.4
North Bridge Voltage Reference: AUTO
South Bridge Voltage: AUTO
clock Over charging voltage: Auto
Load Line Calibration [Enabled]

Try these settings plz, first try with 7 multi then test thoroughly, if all is well go to 8X you get 3.2Ghz (maybe you need to up the Vcore) and get decent speed out of ya rams