Tssk , Tssk , Tssk Why is it that I do not have any of these issues with DFI 790FX-M2R or 2 Phenoms now? Lets look at the common denominator here.....Ummmmm....thats right High HT and too much voltage When are you guys gonna listen? I keep saying High HT means moot and AMD CPU's have a memory when it comes to voltage applied and the Phenom needs to be approached with a light and artful touch

Perhaps this is my fault as I have not been able to dedicate the time to posting the necessary precautions associated with overclocking Phenom with this board You CANNOT leave the default Vcore of 1.31 set in Bios and work from there by leaning on the Voltage in attempts of overclocking Phenom guys! First agenda should be to get it to run stock at the lowest possible voltage settings and train you're CPU to run at such. AMD CPU's have a memory and if you train them to run stock at @1.31v then after a certain period of time they will not run stock at lower voltage and even more voltage will be required to overclock the CPU in Return, which from the start what I have seen on this forum in regards to Phenom Overclockig leads to failure in a hurry! Take the advice and release these old mundain thoughts associated with K8 Overclocking (High HT) as it means ...MOOT...and should only be used to fine tune you established Base Overclock which is achievable via CPU , NB ,HT , Ram all being able to clock independently HT Overclockig is DEAD...Get Over It already please