Quote Originally Posted by jonspd View Post
wtf

bring it back to life LOL

o well send a rma like dave had to do is it really dead?
Man, under load I went away and came back seeing a flash from the board
Tested 3 PSUs, 3 RAM sticks and 2 CPUs, all worked in other two boards but did not work in MSI.
Then checked it all out alone - it powers on but then switches off with a flash as if there's a short circuit somewhere.. there isn't anywhere but on the board, near a capacitor. Looks like on of the circuitry wires has broken walls. definitely a dead board.
I can't RMA, skanky MSI are asking me to pay $60 for the RMA, testing and replacement where by UK statutory law they have to provide me 12 months warranty at no cost
They claim its their EU repair center that imposes these charges by default.

The above SuperPi 1M benchmark was at 3000MHz CPU, 2400MHz NB, 800MHz RAM 4-4-4-8-15 Unganged.
The rest of the benchmarks I ran, the Universe suite, are below [that server is "eating" all our uploaded results]:





















I am currently on Abit AX78 at 2.7GHz stock volts although only installed one DIMM, first BIOS: http://global.phoronix-test-suite.co...64-32241-32236

The PWM has no problem so far, they are actually running very cool compared to what my MSI was running.

Quote Originally Posted by justapost View Post
Non working 9850BE here. sensors-detect -> C1
9600BE working fine. Not that i think this is funny, the only thing beside stock was the cpu-multi at 13,5.
Thank you for all the info Achim
But I have a lot of work to do now before I can get to play about with that.

I still have C1 errors on all boards, they only go away if I run Corsair 800 RAM, no 1066 or 1000 RAM will boot, all of them give C1 for a while. Try and get hold of some 800 rated compatible RAM