**Official DFI LanParty UT X48-T2R(and LT) Discussion

[PnoT]

Here is my latest stable.



I kept getting a failure after 2 - 2.5 hours and my games would crash but not BSOD windows. I remember in a previous post in these forums that someone mentioned bumping up VTT a notch or two to provide stability. 1.16 VTT and the proper gtl refs fixed those crashes and 8+ hours and counting.

I still need to tweak out my ram for sure and also push the cpu harder but i'm pretty happy with getting 4ghz stable so far.. shesh it's took a long time.

[Tony]

GTLs are basically for core stability when applying high FSB values and not RAM. That's a really basic breakdown but you get what i mean.

A much easier way to understand is this.

Imagine a cloths line with items hung on it... the line is the FSB and the items are the cores on the CPU and the chipset. Adjusting GTL strengthens the hold each item has to remain on the line...incorrect settings the items fall off the line.

Its a fine balance to keep everything sitting sweet on the FSB, each item has to be tuned at high FSB bus speeds as you are at the upper end of its tolerance.

[zsamz_]

pnot you runnin real hot there on nb n pwm personnally i never saw mine go over 38 even @ 1.6v

[zsamz_]

from my testing gtl settings are forgiving @ low fsb the higher you go the tighter setting after 500 you gotta be verry precise but still the board is forgiving on dual cores much tougher on quads
i can be off by 10 n i will still boot as long as the other settings relate
once each setting dont relate you wont boot
1 wrong setting is like having a flat tire
from what i noticed the higher the setting for 65nm the hotter the board gets but its more stable

[PnoT]

pnot you runnin real hot there especially on nb n pwm

Hmmm, I might need to adjust my exhaust fan and put another fan on my TRUE for push/pull. At the moment i only have 1 fan pushing and nothing on the NB at all. I'll also check the other posts in this forum to see what average is.

I keep forgetting which is which... NB is chipset and PWM are system?


Thanks for pointing that out.

[h@RRy]

A much easier way to understand is this.

Imagine a cloths line with items hung on it... the line is the FSB and the items are the cores on the CPU and the chipset. Adjusting GTL strengthens the hold each item has to remain on the line...incorrect settings the items fall off the line.

Its a fine balance to keep everything sitting sweet on the FSB, each item has to be tuned at high FSB bus speeds as you are at the upper end of its tolerance.

Damn good analogy

Thanks T,
h

[CERO]

Yes NB= chipset and PWM= system

[jimmyz]

Just saw them again at Motherboardpro for $315 now!!!!! must resist...lol

http://www.motherboardpro.com/DFI-La...ail-p-618.html


I am so happy with my X-38 version that it makes it tough to think of moving to another board even though I know it would be better.

[KanGaXx]

bios bios for mCH ?

[RGone]

bios bios for mCH ?

Probably not happening in the next few days and it will not do for you what you want anyway, which is the dream of enough FSB to push a small multiplier cheap cpu faster. The whole design of the X48 chipset was to have its' best performance in the 466 FSB range which was the natural progression from 200, 266, 333, 400 and then 466, since Intel designs both the cpu and the chipset.

[REBEL900]

Hi, read through most of the thread and i see alot of happy tweaking going on, great!

I am looking to build my next system around an E8500 with a pair of Ballistix 4GB tracers and would like to know if it's a or should i wait for P45.

Thanks

[zsamz_]

Hmmm, I might need to adjust my exhaust fan and put another fan on my TRUE for push/pull. At the moment i only have 1 fan pushing and nothing on the NB at all. I'll also check the other posts in this forum to see what average is.

I keep forgetting which is which... NB is chipset and PWM are system?


Thanks for pointing that out.

you not runnin a quad so should be much cooler
put a 120mm fan on nb your temps will drop @ least 10c waste of money to get an hr-05 ifx
me i got a 100++++cfm fan on my true it sounds like a helicopter on full lol n it weighs a pound lol
add a fan push them volts lol

[zsamz_]

Probably not happening in the next few days and it will not do for you what you want anyway, which is the dream of enough FSB to push a small multiplier cheap cpu faster. The whole design of the X48 chipset was to have its' best performance in the 466 FSB range which was the natural progression from 200, 266, 333, 400 and then 466, since Intel designs both the cpu and the chipset.

best performance is @ 533 lol

[zsamz_]

Just saw them again at Motherboardpro for $315 now!!!!! must resist...lol

http://www.motherboardpro.com/DFI-La...ail-p-618.html


I am so happy with my X-38 version that it makes it tough to think of moving to another board even though I know it would be better.

ya i know exactly what you mean just saw a sale on the 8400 for 198$ i almost pushed the buy button
n when the p45 come out gonna be so hard not to get one of those
i just hope i can resist more than a few weeks after they come out gonna be tough

i'm a junkie but i only smoke pc parts

[Praz]

best performance is @ 533 lol

Yep sure is. Artificial performance using any type of benchmark that thrives on FSB. But real world tweaked is 450-470.LOL

[golfjam]

Hello, I just got this mobo after a terrible experience w/ a 790i S2E. The board itself is awesome, overclocked with easy and no regrets so far. My only problem is I can't shutdown my computer. After I log off from Windows, you can hear 2 clicks coming from the mobo, it shutdowns and restarts after 2 sec. I disconnected the rainbow cable, to make sure there's no short, and same thing. Does anyone a fix for this or do I need to RMA?? Many thanks in advance.

[Aldy402]

most of you guys don't have the 5v power connector by the pci-e slots connected right? I don't

just trying to see if i'm the only one..

[Jor3lBR]

Hello, I just got this mobo after a terrible experience w/ a 790i S2E. The board itself is awesome, overclocked with easy and no regrets so far. My only problem is I can't shutdown my computer. After I log off from Windows, you can hear 2 clicks coming from the mobo, it shutdowns and restarts after 2 sec. I disconnected the rainbow cable, to make sure there's no short, and same thing. Does anyone a fix for this or do I need to RMA?? Many thanks in advance.

In all those pages here I never saw this problem in this board. Is this a FRESH windows install?
PS.: I like your Avatar by the way PENTA!

most of you guys don't have the 5v power connector by the pci-e slots connected right? I don't

just trying to see if i'm the only one..

I think everybody uses them, when DFI board asks for more power you don;t hesitate in giving to it...

[zsamz_]

Yep sure is. Artificial performance using any type of benchmark that thrives on FSB. But real world tweaked is 450-470.LOL

its all depending of the ram praz board is worse than my wife pickin her daily clothes its picky lol
with my ballistix sweet spot is 505-520
with mushkins its 440-480 cas3 n cas 4

[Jor3lBR]

its all depending of the ram praz board is worse than my wife pickin her daily clothes its picky lol
with my ballistix sweet spot is 505-520
with mushkins its 440-480 cas3 n cas 4

<!Poll Can zsam turn a page in XS without saying the words ram & picky (not necessarily in this order)?

[golfjam]

In all those pages here I never saw this problem in this board. Is this a FRESH windows install?
PS.: I like your Avatar by the way PENTA!

yeap. lucky me i guess... rma it is, again. newegg will blacklist me pretty soon. it will be my 5th mobo rma this year. valeu!!

[CoolZone]

Anyone has got their UT mobos yet?

[zsamz_]

<!Poll Can zsam turn a page in XS without saying the words ram & picky (not necessarily in this order)?

my luck suks
last year i was wishin to have some d9gkx stix
now i got 3 sets and i just bought a pair of kingston hyperx 3 weeks ago to add to my 2x512 8500hyperx stupid move
now i thinkin of gettin some dominators pc2-8500 2x2 lol on sale for 95$
my collectin keeps on growing lol damnit i gotta stop it

[PnoT]

I'm having an odd problem with this board and I'm hoping someone else has a fix maybe.

I set my computer to hibernate in the mornings when i go to work but some times from work i use Wake on LAN to get my PC up and running so i can pull some information off of it. The problem I'm having is the first wake works flawless but after i suspend it again and try to wake it doesn't work. The post code shows CF which is CMOS check.

What's that?

[Rinaun]

I need that beta bios. My ram can pass 1066 stable, and 450+ fsb, but whenever I set it to 333/800 and go past 410 FSB, I get crashes. I've tried EVERYthing. I currently use a NB of 1.30, VTT of 1.35. any higher causes crashes in OCCT. I'll post my bios settings when I can see better (its late).