G.Skill has updated the F2-8000CL5D-4GBPQ User Manual
The Motherboard Compatibility List has been updated as of 4-15-08
G.Skill has updated the F2-8000CL5D-4GBPQ User Manual
The Motherboard Compatibility List has been updated as of 4-15-08
E8600
GA X48-DS4
4GB OCZ Platinum LV-1150
2x Samsung F3 500GB RAID0
PCS+ AX5870
LG W2600H-PF
Lian Li A16B
Win7 Pro x64
1200 is WAY pushing it, some *choice* kits might get that with 2.2-2.3V....it's NOT about voltage though, Powerchips don't scale with voltage...it's about certain batches/chips being able to hit a higher number.
What i will say is pretty much all 1000MHz rated kits will reach 1066MHz with 2.0-2.1V, my own reaches this with 2.05V.
Gigabyte EP45-DQ6 - rev 1.0, F13a bios | Intel Q9450 Yorkfield 413x8=3.3GHz | OCZ ProXStream 1000W PSU | Azuen X-Fi Prelude 64MB X-RAM| WD VelociRaptor 74HLFS-01G6U0 16MB cache 74GB - 2 drive RAID 0 64k stripe | ASUS 9800GT Ultimate 512MB RAM (128 SP!!) | G.SKILL PC2-8800 4GB kit @ 1100MHz | OCZ ATV Turbo 4GB USB flash | Scythe Ninja Copper + Scythe 120mm fan | BenQ M2400HD 24" 16:9 LCD | Plextor 716SA 0308; firmware 1.11 | Microsoft Wireless Entertainment Desktop 8000 | Netgear RangeMax DG834PN 108mbps; firmware 1.03.39 + HAWKING HWUG1 108mbps USB dongle | Digital Doc 5+ | 7 CoolerMaster 80mm blue LED fans | Aopen H700A tower case | Vista Home Premium - 32bit, SP1
I wish they did a guide for DFI, as I am having a hell of a time trying to get the subtimings right on my X48. 424x9 on 333/800 strap, and I've tried almost everything. any suggestions /settings from those who haver this board and ram?
i have a DFI DK, finally was able to boot up (auto of 1.8V was the problem)Originally Posted by Rinaun
and i also have a hell of a time, this week i dont have any time to try a lot of settings, but next week i hopefully will able to crack that bios code
well my first test arent any good, 533mhz is gonna be a pain in the ass...
even at 2.2V those stick dont like to go high it seems, to bad
526mhz is doable
my set will be here tomorrow, i hope they can do 534mhz 24/7
Did you try setting the tRFC to 47-52 like others have suggested?
Last edited by ThatGuy16; 04-28-2008 at 09:14 PM.
[SIGPIC][/SIGPIC]
3DMark06: 20974
Yes. Mine don' hit higher than 1050 so far.my set will be here tomorrow, i hope they can do 534mhz 24/7
Did you try setting the tRFC to 47-52 like others have suggested?
trfc was at 52...my set will be here tomorrow, i hope they can do 534mhz 24/7
Did you try setting the tRFC to 47-52 like others have suggested?
i am trying a lot of different setting but 534 doesnt work...
Well, for the price.. i guess we can't complain too much
I'm waiting on the UPS guy to deliver mine, we'll see what i get.
[SIGPIC][/SIGPIC]
3DMark06: 20974
Post your sub-timings guys, and be sure to compare them with mine.
Formerly XIP, now just P.
i even tried with lot lot looser subs...
maybe the new bios i flashed today will do some miracles
My sums are set to Auto, Performance Level 7.
Gigabyte EP45-DQ6 - rev 1.0, F13a bios | Intel Q9450 Yorkfield 413x8=3.3GHz | OCZ ProXStream 1000W PSU | Azuen X-Fi Prelude 64MB X-RAM| WD VelociRaptor 74HLFS-01G6U0 16MB cache 74GB - 2 drive RAID 0 64k stripe | ASUS 9800GT Ultimate 512MB RAM (128 SP!!) | G.SKILL PC2-8800 4GB kit @ 1100MHz | OCZ ATV Turbo 4GB USB flash | Scythe Ninja Copper + Scythe 120mm fan | BenQ M2400HD 24" 16:9 LCD | Plextor 716SA 0308; firmware 1.11 | Microsoft Wireless Entertainment Desktop 8000 | Netgear RangeMax DG834PN 108mbps; firmware 1.03.39 + HAWKING HWUG1 108mbps USB dongle | Digital Doc 5+ | 7 CoolerMaster 80mm blue LED fans | Aopen H700A tower case | Vista Home Premium - 32bit, SP1
Does somebody already have the "new" models, whit new heatspreaders?
Greets!
Look at my sub-timings and copy them.
Formerly XIP, now just P.
anybody using these on a dfi lt x48? please share your best performance settings. save me hours
thanks
i5 2500k @ 4.6ghz 1.335v [ASUS P8Z68 Deluxe]
8gb gskill ripjaws f3-12800cl8-8gbxm
600gb velociraptor + 1TB black
MSI N560GTX-TI Twin Frozr II + x-fi xtrememusic
corsair hx-620w + lian li pc201b + dell 2408fpw
d-tek fuzion1/ddc2 + petra top/thermochill pa120.3
I just got mine, with the sub-timings, do you set it in memset or bios?
My bios looks like this, i have no idea what to change.
Last edited by ThatGuy16; 04-29-2008 at 02:51 PM.
[SIGPIC][/SIGPIC]
3DMark06: 20974
ThatGuy16.. I run the ram at DDR1000 5-5-5-15-2-3-3-47-1-7-29-2.. Same bios as you. That is as tight as I can get it stable around that speed.
Nergal: Coolermaster Stacker STC-01, Gigabyte 990FXA-UD7 w/ EK Waterblock, AMD Phenom x6 1090T @ (4.1GHz, 2400MHz HT-Link, 3000MHz CPU-NB) w/ Swiftech Apogee XT, G.SKILL Ripjaws X F3-17000CL11Q-16GBXL (4x4GB) @ 7-8-8-24 1600MHz, 3x Radeon 5870 (2 w/ Swiftech MCW-82, 1 w/ Zalman VF3000A), OCZ X3 2000w, 2x Samsung Spinpoint F3 1TB 7200RPM in RAID1, 4x Seagate Barracuda 2TB 5900RPM in RAID10, ASUS Xonar Essence STX, Swiftech MCR320-QP Radiator, Swiftech MCP655-B Pump, Windows Server 2008 R2
Death: Antec One Hundred Ice, Gigabyte 990FXA-UD5, Phenom x4 840 @ 4GHz, G.SKILL Ripjaws F3-10666CL7D-4GBRH (2x2GB), Gigabyte Radeon 5870 under Zalman VF3000A, XFX Radeon 5850, Asus 5850 DirectCU, 1TB Samsung Spinpoint F1 7200RPM(Windows 7 Enterprise), Western Digital Raptor 150GB (CentOS 6.2)
Just tried it, and was not succesful. I can't even get DDR2-890 without a lockup 5 minutes into windows.
I need HELP, please!!
I'm about out of ideas, i bought this ram to replace of my crappy corsair so i can get my CPU further. I'm hoping it user error...
[SIGPIC][/SIGPIC]
3DMark06: 20974
The only way i can even get it to post at DDR2-890 is on AUTO, and at that it freezes in windows
This is at 890 on AUTO, I'm mad.. i want to start overclocking, but i can't figure any of this out!
Any suggestions, please?
WAY under spec.. i'm running everything at stock right now, just to be posting here.
[SIGPIC][/SIGPIC]
3DMark06: 20974
The only way i can even get it to post at DDR2-890 is on AUTO, and at that it freezes in windows
This is at 890 on AUTO, I'm mad.. i want to start overclocking, but i can't figure any of this out!
Any suggestions, please?
WAY under spec.. i'm running everything at stock right now, just to be posting here.
Whats your NB voltage with those ram? Mine need about 1.45v actual on this board.
@ Aldy402 I have my settings a few pages back, maybe just do a search for my SN to find them.
Larry
Q9650
Asus P5Q-D Bios 1406
280 GTX FC Block
2x2gb OCZ Flex II PC2 9200
Water Cooled/ Iwaki MD20/ D-Tek Fuzion
XFX 850 Watt
OWC SSD
hehe, yeah.. its was my NB voltage the whole time
[SIGPIC][/SIGPIC]
3DMark06: 20974
Well, atleast i found my problem.
I'm running orthos with these at 1068, IF it passes, i'll run memtest for a pass or two..
Now i need to get it stable enough for 4.6Ghz+ benching, but I guess its my board having trouble getting above 500 FSB
[SIGPIC][/SIGPIC]
3DMark06: 20974
All I can say is Wow! 550Mhz at 2.1V at 10 hours of Memtest, and 24hrs of prime...and for $85....sick RAM as always...never had a bad G.Skill stick!Awesome RAM.
Tried 565Mhz but it was a no go at any timings, and up to 2.2V...
Timings...
Last edited by aicjofs; 04-29-2008 at 10:53 PM.
3770K @ 4.8Ghz 1.42V | GSkill 2x4GB @ 1066Mhz | Asrock Extreme4
2600K @ 4.5Ghz 1.38V | GSkill 2x4GB @ 933Mhz CAS 9-10-9 1.5v | Asrock Z68M/USB
1090T @ 3.8 Ghz 1.42V | Crucial 4x2GB 666 CAS 8 | Asus M4A79XTD EVO
Q6600 @ 3.66Ghz(8x458) 1.35V | GSkill 2x2GB @ 550Mhz 5:5:3:13 2.1V | Asus Maximus Formula(Rampage 0401) |
Well, i got mine at DDR2-1068 2.08v 5-5-5-12. I ran memtest for one hour, and played games for a few hours. Seems stable to me, i might do a long run of memtest later though.
My sub-timings are set to auto, every time i make any small change, my system locks up, or doesn't post.
[SIGPIC][/SIGPIC]
3DMark06: 20974
Try TRFC @ 54-55.All I can say is Wow! 550Mhz at 2.1V at 10 hours of Memtest, and 24hrs of prime...and for $85....sick RAM as always...never had a bad G.Skill stick!
Tried 565Mhz but it was a no go at any timings, and up to 2.2V...
Formerly XIP, now just P.
Posting Permissions
Reply With Quote
Bookmarks