rather than waste hours on occt/prime95, I first use systool pi test quad 16M or dual 32M (for quad core or dual core respectively) if you only have 2GB ram - don't try quad 32M as you'd run of my memory heh.

systool pi tests takes around 4-8 mins to run and should be a good starter.

wrong GTL ref volts or unstable FSB as well as unstable mem settings will reboot system usually.

then you can move onto prime95 tests etc

Quote Originally Posted by Rinaun View Post
Thanks for the advice eva, I saw you enjoying your new chip in the other thread. Think you can push it much farther?
on air not much more i don't think as heat is holding it back 78+ C load temps.. water maybe another 100Mhz for 32M i hope