Quote Originally Posted by tastymannatees View Post
Pressurefilm Instructions

Key points

The test needs to come from a system that has been thermally tested with ICD7 I need to be able to relate the pressure test to a thermal result.

Ideally I would like tests from an equal number of +/- thermal results

Test is run cold - Cpu should be room temp

Take one donor and print and place the smooth sides to sink and IHS with the "frosted sides" facing each other, place on cpu and mount sink.

Wait 10 min disassemble and place print in the sample envelope provided.- Do not seal! I want to scan each one before I send them out for processing.

Note heat sink and cpu on sample envelope. also note the number of your posted forum thermal result . Place samples in return envelope provided and return.

I only need a max of 2 per if you only want to do one thats fine. Extras are for any misfires or your own use if you want to check contact on you own

Thanks for your time and efforts

Andrew
let me add 1 thing to these instructions! label the top of the cpu on the print.