brian, i liked the stock cooler so much, i took the ole dremel and wacked it off the rest of the sink....then flattend it out. in the process, i took off the plating to get right down to the alluminum. then i used some real thin thermal tape. its made by 3M and is about .015 in thick. also i am going to mount a small fan to it. i have to mount the other 120mm case fans, get the top and front covers, install lights, and i will start working over the clocking. i ran the Q6600 @ 3.6 24-7 before with a koolance rig. btw, my therory as of far.....no block i seen so far is flat. real close, but not flat.......peace, randy.Originally Posted by 71 (Bryan)
Reply With Quote
Bookmarks