Quote Originally Posted by Ace-a-Rue View Post
vcore= 1.45 (actual)...(be ready to give it more because of Vdroop under load)
MCH= 1.48 (might require higher)
CPU VTT= 1.30
ICHIO1.5= 1.70 (maybe, 1.80)
ICH1.05= 1.05 (or 1.09)
DDR2= 2.0 to 2.1
DDR2 REF= +2%
CPU GTLREF= 67-69% (for 65nm CPU's) (45NM CPU's go lower)
Thank you ace. I cannot keep it stable even with 1.5V. On load (priming) goes down to 1,4-1.41V.
I am really dissapointed with this board. Vdrop is too much and i am on air so i cannot try over 1.51V.
So far the only prime stable point i have is 8x420 @1.5V 1.41 on load)
Is vdrop getting less with bios 16 or is it the same? I usr bios 14 now.
I am really thinking going for a m/b having voltage calibration in bios menu....